刚才的代码有错误,请你分别改一下,win = eval([win_type, '(win_len/1000*fs)']); % 定义窗口函数,找不到 'Hamming' 的完全匹配项(区分大小写)。
时间: 2024-03-30 13:38:15 浏览: 26
好的,我来帮你修改代码。这是一个MATLAB代码,并且这里的错误是因为MATLAB无法找到与字符串'Hamming'完全匹配的函数名称。为了解决这个问题,我们需要使用MATLAB内置的字符串匹配函数来查找与'Hamming'最相似的字符串。这里我推荐使用MATLAB自带的函数strcmpi来进行字符串匹配,它可以忽略大小写的差异。根据这个方法,我们可以将代码修改为:
win = eval([win_type, '(win_len/1000*fs)']); % 定义窗口函数
if ~strcmpi(win_type, 'Hamming')
disp(['Warning: Unknown window type "', win_type, '". Using Hamming window instead.']);
win = hamming(win_len/1000*fs);
end
这个修改后的代码将首先尝试使用用户指定的窗口类型进行计算。如果找不到指定的窗口类型,它将输出一条警告消息,并使用Hamming窗口进行计算。希望这个修改后的代码能够解决你的问题。
相关问题
train_data_path = os.path.join(data_dir, 'train') valid_data_path = os.path.join(data_dir, 'val') train_low_data_names = glob(train_data_path + '/low/*.png') # glob(data_dir + '/train/low/*.png') train_low_data_names.sort() train_high_data_names = glob(train_data_path + '/high/*.png') # glob(data_dir + '/our485/high/*.png') train_high_data_names.sort() eval_low_data_names = glob(valid_data_path + '/low/*.*') eval_low_data_names.sort() eval_high_data_names = glob(valid_data_path + '/high/*.*') eval_high_data_names.sort() assert len(train_low_data_names) == len(train_high_data_names) assert len(train_low_data_names) != 0逐句解释一下这段代码
这段代码的作用是加载训练和验证数据的文件路径,并对文件路径进行排序。然后,它使用断言语句来确保训练低分辨率图像数据的列表 `train_low_data_names` 和训练高分辨率图像数据的列表 `train_high_data_names` 长度相等且不为零。
逐句解释这段代码:
1. `train_data_path = os.path.join(data_dir, 'train')`:将训练数据文件夹路径与 'train' 目录拼接,得到训练数据集的完整路径。
2. `valid_data_path = os.path.join(data_dir, 'val')`:将验证数据文件夹路径与 'val' 目录拼接,得到验证数据集的完整路径。
3. `train_low_data_names = glob(train_data_path + '/low/*.png')`:使用 `glob` 函数查找训练低分辨率图像数据文件夹中所有以 '.png' 扩展名结尾的文件,并将它们的路径存储在 `train_low_data_names` 列表中。
4. `train_low_data_names.sort()`:对训练低分辨率图像数据的列表进行排序,以确保它们按照字母顺序排列。
5. `train_high_data_names = glob(train_data_path + '/high/*.png')`:使用 `glob` 函数查找训练高分辨率图像数据文件夹中所有以 '.png' 扩展名结尾的文件,并将它们的路径存储在 `train_high_data_names` 列表中。
6. `train_high_data_names.sort()`:对训练高分辨率图像数据的列表进行排序,以确保它们按照字母顺序排列。
7. `eval_low_data_names = glob(valid_data_path + '/low/*.*')`:使用 `glob` 函数查找验证低分辨率图像数据文件夹中的所有文件,并将它们的路径存储在 `eval_low_data_names` 列表中。
8. `eval_low_data_names.sort()`:对验证低分辨率图像数据的列表进行排序,以确保它们按照字母顺序排列。
9. `eval_high_data_names = glob(valid_data_path + '/high/*.*')`:使用 `glob` 函数查找验证高分辨率图像数据文件夹中的所有文件,并将它们的路径存储在 `eval_high_data_names` 列表中。
10. `eval_high_data_names.sort()`:对验证高分辨率图像数据的列表进行排序,以确保它们按照字母顺序排列。
11. `assert len(train_low_data_names) == len(train_high_data_names)`:断言训练低分辨率图像数据的列表 `train_low_data_names` 和训练高分辨率图像数据的列表 `train_high_data_names` 的长度相等。
12. `assert len(train_low_data_names) != 0`:断言训练低分辨率图像数据的列表 `train_low_data_names` 的长度不为零。
这些断言语句用于确保数据加载的正确性和一致性。如果断言条件不满足,将会引发 `AssertionError` 异常。
int main(void) { / configure systick / systick_config(); / configure board / bsp_board_config(); / configure GPIO / can_gpio_config(); / initialize CAN and filter */ can_config(); printf("\r\ncommunication test CAN0, please press WAKEUP key to start! \r\n"); can_struct_para_init(CAN_MDSC_STRUCT, &transmit_message); can_struct_para_init(CAN_MDSC_STRUCT, &receive_message); /* initialize transmit message */ transmit_message.rtr = 0; transmit_message.ide = 0; transmit_message.code = CAN_MB_TX_STATUS_DATA; transmit_message.brs = 0; transmit_message.fdf = 0; transmit_message.prio = 0; transmit_message.data_bytes = 8; /* tx message content */ transmit_message.data = (uint32_t *)(tx_data); transmit_message.id = 0xAA; receive_message.rtr = 0; receive_message.ide = 0; receive_message.code = CAN_MB_RX_STATUS_EMPTY; /* rx mailbox */ receive_message.id = 0x55; receive_message.data = (uint32_t *)(rx_data); can_mailbox_config(CAN0, 0, &receive_message); while(1) { /* test whether the WAKEUP key is pressed */ if(0 == gd_eval_key_state_get(KEY_WAKEUP)) { delay_1ms(100); if(0 == gd_eval_key_state_get(KEY_WAKEUP)) { /* transmit message */ can_mailbox_config(CAN1, 1, &transmit_message); printf("\r\nCAN1 transmit data: \r\n"); for(i = 0; i < 8; i++) { printf("%02x\r\n", tx_data[i]); } /* waiting for the WAKEUP key up */ while(0 == gd_eval_key_state_get(KEY_WAKEUP)); } } communication_check(); } }怎么在接收到数据以后再发送接收到的数据
在接收到数据后,您可以在接收循环中添加发送数据的代码。可以像下面这样修改您的代码:
```c
while (1) {
/* test whether the WAKEUP key is pressed */
if (0 == gd_eval_key_state_get(KEY_WAKEUP)) {
delay_1ms(100);
if (0 == gd_eval_key_state_get(KEY_WAKEUP)) {
/* transmit message */
can_mailbox_config(CAN1, 1, &transmit_message);
printf("\r\nCAN1 transmit data: \r\n");
for (i = 0; i < 8; i++) {
printf("%02x\r\n", tx_data[i]);
}
/* waiting for the WAKEUP key up */
while (0 == gd_eval_key_state_get(KEY_WAKEUP));
}
}
// Check if CAN message received
if (can_receive_flag) {
can_receive_flag = 0;
// Process received data here
// Copy received data to transmit message
memcpy(tx_data, rx_data, 8);
/* transmit message */
can_mailbox_config(CAN1, 1, &transmit_message);
printf("\r\nCAN1 transmit data received: \r\n");
for (i = 0; i < 8; i++) {
printf("%02x\r\n", tx_data[i]);
}
}
communication_check();
}
```
以上代码在接收到数据后,将接收到的数据复制到发送数据的数组中,并再次发送给CAN总线。请确保在适当的位置设置`can_receive_flag`,以便在接收到数据时设置该标志。同时,请根据您的具体需求进行相应的数据处理。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)