LM158芯片怎么配置ADC采集220V电压,使用stm32的pe3引脚
时间: 2024-03-15 11:47:46 浏览: 43
LM158是一款运算放大器芯片,不具备ADC功能,因此无法直接使用它来采集电压。如果你需要采集220V电压,建议使用外部电阻分压将电压降低到可接受的范围内,然后使用STM32内置的ADC模块进行采集。
针对你的具体问题,可以按照以下步骤进行配置:
1. 将电压通过外部电阻分压降低到STM32的ADC输入电压范围内,一般为0~3.3V。
2. 将PE3引脚配置为模拟输入引脚。
3. 配置ADC模块,设置采样时间、采样通道、采样精度等参数。
4. 在代码中启动ADC转换,并读取采样结果。
以下是一个简单的示例代码,仅供参考:
```c
// 配置PE3为模拟输入引脚
GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.Pin = GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
// 配置ADC模块
ADC_HandleTypeDef hadc;
hadc.Instance = ADC1;
hadc.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV2;
hadc.Init.Resolution = ADC_RESOLUTION_12B;
hadc.Init.ScanConvMode = DISABLE;
hadc.Init.ContinuousConvMode = DISABLE;
hadc.Init.DiscontinuousConvMode = DISABLE;
hadc.Init.NbrOfDiscConversion = 0;
hadc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
hadc.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc.Init.NbrOfConversion = 1;
hadc.Init.DMAContinuousRequests = DISABLE;
hadc.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
HAL_ADC_Init(&hadc);
// 启动ADC转换
uint32_t adcValue = 0;
HAL_ADC_Start(&hadc);
HAL_ADC_PollForConversion(&hadc, 100);
adcValue = HAL_ADC_GetValue(&hadc);
HAL_ADC_Stop(&hadc);
// 将采样结果转换为电压值
float voltage = adcValue * 3.3 / 4095;
float inputVoltage = voltage / (R2 / (R1 + R2));
```
其中,R1和R2分别为分压电阻的两个电阻值,可以根据实际情况进行调整。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)