首页stm32f030c8t6flash

stm32f030c8t6flash

时间: 2023-09-24 13:08:18 浏览: 134

stm32flash

5星 · 资源好评率100%

Linux下用于串口下载stm32固件的程序， Usage: ./stm32flash [-bvngfhc] [-[rw] filename] /dev/ttyS0 -b rate Baud rate (default 57600) -r filename Read flash to file -w filename Write flash to file -u Disable the flash write-protection -e n Only erase n pages before writing the flash -v Verify writes -n count Retry failed writes up to count times (default 10) -g address Start execution at specified address (0 = flash start) -s start_page Flash at specified page (0 = flash start) -f Force binary parser -h Show this help -c Resume the connection (don't send initial INIT) *Baud rate must be kept the same as the first init* This is useful if the reset fails Examples: Get device information: ./stm32flash /dev/ttyS0 Write with verify and then start execution: ./stm32flash -w filename -v -g 0x0 /dev/ttyS0 Read flash to file: ./stm32flash -r filename /dev/ttyS0 Start execution: ./stm32flash -g 0x0 /dev/ttyS0

STM32F030C8T6 is a microcontroller from STMicroelectronics' STM32F0 series. It has an embedded flash memory of 64KB. The flash memory is used to store the program code and data for the microcontroller. The flash memory can be programmed and erased in-system through the microcontroller's on-chip bootloader or using an external programmer/debugger. The flash memory on STM32F030C8T6 supports up to 10,000 erase/program cycles and has a data retention period of 20 years at 55°C. The flash memory is organized into sectors, and each sector can be independently erased and programmed.

阅读全文