请给我一个在CC2530单片机上运行的DS18B20的C语言测试案例
时间: 2023-06-05 09:06:45 浏览: 64
好的,以下是一个在CC2530单片机上运行的DS18B20的C语言测试案例:
```
#include <ioCC2530.h>
#define DS18B20_GPIO P0_7 // DS18B20使用的GPIO口
#define DS18B20_HIGH_TIME 6 // DS18B20高电平保持时间
#define DS18B20_LOW_TIME 60 // DS18B20低电平保持时间
// 延时函数,us为微秒数
void delay_us(unsigned int us)
{
while (us--) {
__delay_cycles(24); // 延时1微秒
}
}
// 初始化DS18B20
int ds18b20_init(void)
{
int presence;
DS18B20_GPIO = 1; // 先将总线置高
delay_us(150); // 等待150us
DS18B20_GPIO = 0; // 将总线置低
delay_us(480); // 等待480us
DS18B20_GPIO = 1; // 将总线置高
delay_us(60); // 等待60us
presence = DS18B20_GPIO; // 接收DS18B20应答信号
delay_us(240); // 等待240us
if (presence) {
// DS18B20存在
return 0;
} else {
// DS18B20不存在
return -1;
}
}
// 发送一个字节的数据到DS18B20
void ds18b20_send_byte(unsigned char byte)
{
unsigned char i;
for (i = 0; i < 8; i++) {
DS18B20_GPIO = 0; // 将总线置低
delay_us(DS18B20_HIGH_TIME); // 等待DS18B20高电平保持时间
if (byte & 0x01) {
DS18B20_GPIO = 1; // 发送数据位1
} else {
DS18B20_GPIO = 0; // 发送数据位0
}
byte >>= 1; // 右移一位准备发送下一位
delay_us(DS18B20_LOW_TIME); // 等待DS18B20低电平保持时间
DS18B20_GPIO = 1; // 将总线置高
delay_us(1); // 等待1us
}
}
// 从DS18B20读取一个字节的数据
unsigned char ds18b20_read_byte(void)
{
unsigned char i;
unsigned char byte = 0;
for (i = 0; i < 8; i++) {
DS18B20_GPIO = 0; // 将总线置低
delay_us(DS18B20_HIGH_TIME); // 等待DS18B20高电平保持时间
DS18B20_GPIO = 1; // 将总线置高
delay_us(DS18B20_LOW_TIME); // 等待DS18B20低电平保持时间
byte >>= 1; // 先将位清零,准备接收数据位
if (DS18B20_GPIO) {
byte |= 0x80; // 接收数据位1
} else {
byte &= ~0x80; // 接收数据位0
}
delay_us(27); // 等待27us
}
return byte;
}
// 读取DS18B20的温度值
int ds18b20_read_temperature(void)
{
int temperature;
unsigned char low, high;
// 初始化DS18B20
if (ds18b20_init() != 0) {
// DS18B20不存在
return -9999;
}
// 发送跳过ROM操作命令
ds18b20_send_byte(0xCC);
// 发送温度转换命令
ds18b20_send_byte(0x44);
delay_us(750); // 等待750ms,让DS18B20完成温度转换
// 初始化DS18B20
if (ds18b20_init() != 0) {
// DS18B20不存在
return -9999;
}
// 发送跳过ROM操作命令
ds18b20_send_byte(0xCC);
// 发送读取温度命令
ds18b20_send_byte(0xBE);
// 读取温度低位
low = ds18b20_read_byte();
// 读取温度高位
high = ds18b20_read_byte();
// 计算温度值
temperature = (high << 8) | low;
if (temperature & 0x8000) {
temperature = ~temperature + 1;
temperature = -temperature;
}
temperature = temperature * 625 / 100;
return temperature;
}
// 主函数,程序入口
void main(void)
{
int temperature;
// 初始化时钟和GPIO口
CLKCONCMD &= 0x80;
CLKCONCMD &= ~0x40;
P0SEL &= ~0x80;
P0DIR |= 0x80;
P0 &= ~0x80;
// 读取温度并打印
temperature = ds18b20_read_temperature();
if (temperature == -9999) {
printf("DS18B20 not found!\r\n");
} else {
printf("Temperature: %d.%dC\r\n", temperature / 100, temperature % 100);
}
}
```
注意:上述代码仅供参考,具体实现还需要根据实际情况进行调整。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://img-home.csdnimg.cn/images/20210720083646.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)