输出一份思科、华为、新华三、锐捷交换机的命令大全

以下是思科、华为、新华三、锐捷交换机的命令大全：

思科交换机命令：

1. 配置主机名：hostname <name>
2. 配置接口VLAN：interface <interface type><interface number>，switchport mode access，switchport access vlan <vlan ID>
3. 配置Trunk口：interface <interface type><interface number>，switchport mode trunk，switchport trunk allowed vlan <vlan ID>
4. 配置默认网关：ip default-gateway <ip address>
5. 配置静态路由：ip route <destination network> <subnet mask> <next hop address>
6. 配置Telnet：line vty <line number>，password <password>，login
7. 配置SSH：ip ssh version <version>，crypto key generate rsa
8. 配置ACL：access-list <number> permit/deny <protocol> <source address> <wildcard mask> [<destination address> <wildcard mask> <operator> <port>]
9. 配置STP：spanning-tree mode <mode>，spanning-tree vlan <vlan ID> root primary/secondary，spanning-tree portfast

华为交换机命令：

1. 配置主机名：sysname <name>
2. 配置接口VLAN：interface <interface type><interface number>，port link-type access，port default vlan <vlan ID>
3. 配置Trunk口：interface <interface type><interface number>，port link-type trunk，port trunk allow-pass vlan <vlan ID>
4. 配置默认网关：ip route-static 0.0.0.0 0.0.0.0 <next hop address>
5. 配置静态路由：ip route-static <destination network> <subnet mask> <next hop address>
6. 配置Telnet：user-interface vty <line number>，authentication-mode password，set authentication password cipher <password>
7. 配置SSH：ssh server enable，user-interface vty <line number>，authentication-mode aaa，protocol inbound ssh，user privilege level 3
8. 配置ACL：acl number <number>，rule <rule number> permit/deny <protocol> source <source address> <wildcard mask> destination <destination address> <wildcard mask> [destination-port <port>]
9. 配置STP：stp mode <mode>，stp priority <priority>，stp enable

新华三交换机命令：

1. 配置主机名：sysname <name>
2. 配置接口VLAN：interface <interface type><interface number>，port link-type access，port default vlan <vlan ID>
3. 配置Trunk口：interface <interface type><interface number>，port link-type trunk，port trunk allow-pass vlan <vlan ID>
4. 配置默认网关：ip route-static 0.0.0.0 0.0.0.0 <next hop address>
5. 配置静态路由：ip route-static <destination network> <subnet mask> <next hop address>
6. 配置Telnet：user-interface vty <line number>，authentication-mode password，set authentication password cipher <password>
7. 配置SSH：ssh server enable，user-interface vty <line number>，authentication-mode aaa，protocol inbound ssh，user privilege level 3
8. 配置ACL：acl number <number>，rule <rule number> permit/deny <protocol> source <source address> <wildcard mask> destination <destination address> <wildcard mask> [destination-port <port>]
9. 配置STP：stp mode <mode>，stp priority <priority>，stp enable

锐捷交换机命令：

1. 配置主机名：system name <name>
2. 配置接口VLAN：interface <interface type><interface number>，port link-type access，port default vlan <vlan ID>
3. 配置Trunk口：interface <interface type><interface number>，port link-type trunk，port trunk allow-pass vlan <vlan ID>
4. 配置默认网关：ip route-static 0.0.0.0 0.0.0.0 <next hop address>
5. 配置静态路由：ip route <destination network> <subnet mask> <next hop address>
6. 配置Telnet：user-interface vty <line number>，authentication-mode password，set authentication password cipher <password>
7. 配置SSH：ssh server enable，user-interface vty <line number>，authentication-mode aaa，protocol inbound ssh，user privilege level 3
8. 配置ACL：acl number <number>，rule <rule number> permit/deny <protocol> source <source address> <wildcard mask> destination <destination address> <wildcard mask> [destination-port <port>]
9. 配置STP：stp enable，stp force-version <version>，stp priority <priority>