stc89c52中lcd1602显示浮点数
时间: 2023-05-25 15:06:34 浏览: 703
以下是使用STC89C52控制LCD1602显示浮点数的示例代码(基于Keil C语言编写):
首先,需要定义一个浮点数变量,例如:
```c
float number = 123.456;
```
然后,需要将浮点数格式化为字符串,以便在LCD1602上进行显示。可以使用sprintf函数实现此功能:
```c
char buffer[16]; // 定义一个长度为16的字符数组
sprintf(buffer, "%.2f", number); // 将浮点数保留两位小数,并转换为字符串
```
接下来,需要将字符串显示在LCD1602上。我们可以使用LCD1602驱动程序中提供的函数,例如LCD_ShowString:
```c
LCD_ShowString(0, 0, buffer); // 在第一行第一列显示浮点数字符串
```
完整的示例代码如下:
```c
#include <reg52.h>
#include <lcd1602.h> // 包含LCD1602驱动程序
void main() {
float number = 123.456;
char buffer[16];
LCD_Init(); // 初始化LCD1602
sprintf(buffer, "%.2f", number);
LCD_ShowString(0, 0, buffer);
while (1); // 程序循环
}
```
相关问题
lcd1602显示浮点数
LCD1602 通常只能显示整数,如果需要显示浮点数需要进行四舍五入或者取整处理。以下是一个示例代码,以几个步骤演示如何将一个浮点数转换为LCD1602可以显示的字符串:
1. 引入 LiquidCrystal 库
```
#include <LiquidCrystal.h>
```
2. 创建 LiquidCrystal 对象并定义引脚
```
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
```
3. 定义需要显示的浮点数
```
double num = 3.14159;
```
4. 将浮点数转换为字符串
```
char str[10];
dtostrf(num, 5, 2, str); // 将浮点数 num 转换为字符串,保留两位小数,总长度为 5(包括小数点和负号)
```
5. 将字符串显示在 LCD1602 上
```
lcd.setCursor(0, 0); // 设置光标的位置,第 1 行第 1 列
lcd.print("Num: ");
lcd.print(str);
```
完整代码如下:
```
#include <LiquidCrystal.h>
LiquidCrystal lcd(12, 11, 5, 4, 3, 2); // 创建 LiquidCrystal 对象并定义引脚
void setup() {
lcd.begin(16, 2); // 初始化 LCD1602 进行使用
}
void loop() {
double num = 3.14159; // 定义需要显示的浮点数
char str[10];
dtostrf(num, 5, 2, str); // 将浮点数 num 转换为字符串,保留两位小数,总长度为 5(包括小数点和负号)
lcd.clear(); // 清空显示屏
lcd.setCursor(0, 0); // 设置光标的位置,第 1 行第 1 列
lcd.print("Num: "); // 在屏幕上显示 "Num: "
lcd.print(str); // 在屏幕上显示转换后的浮点数
delay(1000); // 延迟 1 秒
}
```
注意:在将浮点数转换为字符串时,`dtostrf()` 函数的第 2 个参数是字符串总长度,包括小数点和负号。如需显示 2 位小数,则总长度应该是 5。如果总长度不够,会导致数字显示不正常。
帮我写一个基于51单片机的lcd1602显示浮点数的程序,精确到小数点后两位
好的,以下是基于51单片机的lcd1602显示浮点数的程序,精确到小数点后两位:
```c
#include <reg51.h>
#include <stdio.h>
#include <string.h>
#define LCD_DATAPORT P0
sbit LCD_RS = P2^0;
sbit LCD_RW = P2^1;
sbit LCD_EN = P2^2;
void LCD_Init();
void LCD_WriteCommand(unsigned char cmd);
void LCD_WriteData(unsigned char dat);
void LCD_WriteString(unsigned char x, unsigned char y, unsigned char *str);
void LCD_WriteFloat(unsigned char x, unsigned char y, float num);
void main()
{
float num = 3.14;
char str[16];
LCD_Init();
while(1)
{
LCD_WriteFloat(0, 0, num);
}
}
void LCD_Init()
{
LCD_WriteCommand(0x38); // function set
LCD_WriteCommand(0x0c); // display on, cursor off, blink off
LCD_WriteCommand(0x06); // entry mode set
LCD_WriteCommand(0x01); // clear display
LCD_WriteCommand(0x80); // set DDRAM address
}
void LCD_WriteCommand(unsigned char cmd)
{
LCD_RS = 0;
LCD_RW = 0;
LCD_EN = 1;
LCD_DATAPORT = cmd;
LCD_EN = 0;
}
void LCD_WriteData(unsigned char dat)
{
LCD_RS = 1;
LCD_RW = 0;
LCD_EN = 1;
LCD_DATAPORT = dat;
LCD_EN = 0;
}
void LCD_WriteString(unsigned char x, unsigned char y, unsigned char *str)
{
unsigned char addr;
if(y == 0)
{
addr = 0x80 + x;
}
else
{
addr = 0xc0 + x;
}
LCD_WriteCommand(addr);
while(*str != '\0')
{
LCD_WriteData(*str);
str++;
}
}
void LCD_WriteFloat(unsigned char x, unsigned char y, float num)
{
char str[16];
sprintf(str, "%.2f", num);
LCD_WriteString(x, y, str);
}
```
注:该程序中使用了 `sprintf()` 函数,需要包含 `<stdio.h>` 库。