当温度超过一定数值控制的程序代码
时间: 2023-09-28 22:12:02 浏览: 32
好的,下面是一份基于STM32单片机的温度控制程序代码,当温度超过一定数值时,控制LED灯亮起。仅供参考:
```c
#include "stm32f10x.h"
#include "delay.h"
#include "dht11.h"
#define LED_PIN GPIO_Pin_12
#define LED_PORT GPIOB
#define THRESHOLD_TEMPERATURE 30
int main(void)
{
uint8_t buf[4];
uint8_t humi, temp;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = LED_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(LED_PORT, &GPIO_InitStructure);
DHT11_Init();
while(1)
{
if(DHT11_Read_Data(buf) == SUCCESS)
{
humi = buf[0];
temp = buf[2];
printf("Humidity: %d%%\r\n", humi);
printf("Temperature: %dC\r\n", temp);
if(temp > THRESHOLD_TEMPERATURE)
{
GPIO_SetBits(LED_PORT, LED_PIN);
}
else
{
GPIO_ResetBits(LED_PORT, LED_PIN);
}
}
Delay_ms(1000);
}
}
```
该程序使用了DHT11温湿度传感器读取当前温度值,并与设定的温度阈值进行比较,如果当前温度超过设定的阈值,则控制LED灯亮起。
需要注意的是,该程序仅供参考,具体实现需要根据具体的硬件设计和需求进行调整。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)