avrdude: verification error; content mismatch
时间: 2023-05-01 08:02:11 浏览: 1164
b'avrdude: verification error; content mismatch'意思是"AVRDUDE: 验证错误;内容不匹配"。这通常是由于写入设备时出现了错误,导致写入的数据与设备上的数据不匹配,进而出现验证错误的提示。可以尝试重新写入设备,或者检查设备是否正常。
相关问题
avrdude: stk500_paged_load(): (a) protocol error, expect=0x10, resp=0x61 avrdude: stk500_cmd(): programmer is out of sync avr_read(): error reading address 0x0000 read operation not supported for memory "flash" avrdude: failed to read all of flash memory, rc=-2 avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x95 avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x95
这个错误通常是与 Arduino 开发板上传时出现的问题。它通常是由于上传时串口通信出现问题或上传时选错了开发板类型导致的。以下是一些可能的解决方案:
1. 请确保您选择的开发板类型与您使用的开发板相匹配。您可以通过 Arduino IDE 中的“工具”菜单来选择正确的开发板。
2. 检查并确保您的串口连接正确。您可以通过 Arduino IDE 中的“工具”菜单来选择正确的串口。
3. 尝试按下 Arduino 开发板上的重置按钮,然后在 Arduino IDE 中开始上传,以确保与开发板的通信正确。
4. 如果您使用的是 USB 转 TTL,建议您尝试更换 USB 转 TTL,因为有时会出现硬件问题。
希望这些解决方案能够帮助您解决问题。
avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x39 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x39 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x39 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x39 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x39 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x39 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x39 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x39 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x39 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x39
这个错误提示通常是由于AVR芯片与编程器之间的通讯问题引起的。可能的原因是:
1. 编程器与计算机连接的USB接口不稳定。
2. 编程器与芯片之间的连接不良。
3. 芯片被损坏或者不支持使用的编程器。
针对这些问题,可以尝试以下解决方法:
1. 确认编程器与计算机连接的USB接口稳定,或者更换USB接口。
2. 检查编程器与芯片之间的连接是否良好,或者更换连接线。
3. 尝试使用另一个芯片进行测试,或者更换支持的编程器。
如果以上方法都无法解决问题,可以尝试在论坛或社区上寻求帮助,或者联系厂家技术支持。