administratively down
时间: 2023-11-03 10:02:50 浏览: 61
"administratively down"是指网络设备(如交换机、路由器等)在管理上被禁用或关停。当设备被设置为administratively down状态时,它将不会传递任何数据流量,无法与其他设备进行通信。
administratively down状态通常是由网络管理员主动进行操作的,用于管理和维护网络设备。它可以是计划维护、设备配置更改、故障排除或安全问题导致的。
一种常见的情况是,当网络管理员需要对交换机进行维护或升级时,他们可以将端口设置为administratively down状态。这将使该端口停止传递数据流量,以确保在维护期间不会中断其他设备的连接。
另一种情况是,如果网络中有一个设备被检测到存在安全漏洞或恶意行为,管理员可以将其端口设置为administratively down状态以隔离该设备,并防止其进一步对网络造成威胁。
总之,administratively down是一个控制网络设备运行状态的管理操作。通过将设备的接口设置为此状态,管理员可以实施必要的维护和安全措施,以确保网络的正常运行和安全性。
相关问题
Router#show ip interface brief Interface IP-Address OK? Method Status Protocol FastEthernet0/0 192.1.1.2 YES manual up up FastEthernet0/1 unassigned YES unset administratively down down FastEthernet1/0 192.1.6.1 YES manual up up FastEthernet1/1 192.1.4.1 YES manual up down Router#Enter configuration commands, one per line. End with CNTL/Z. Router(config)# Router(config)#interface FastEthernet1/1 Router(config-if)# Router(config-if)#exit Router(config)#interface FastEthernet1/0 Router(config-if)# Router(config-if)#exit Router(config)#interface FastEthernet1/1 Router(config-if)#configure terminal ^ % Invalid input detected at '^' marker. Router(config-if)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface FastEthernet1/1 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console Router#show ip interface brief Interface IP-Address OK? Method Status Protocol FastEthernet0/0 192.1.1.2 YES manual up up FastEthernet0/1 unassigned YES unset administratively down down FastEthernet1/0 192.1.6.1 YES manual up up FastEthernet1/1 192.1.4.1 YES manual up down Router#
根据您提供的输出,FastEthernet1/1接口的状态是down。您通过以下命令进行了一些配置更改:
1. 首先,您进入了接口FastEthernet1/1的配置模式:
```
Router(config)#interface FastEthernet1/1
Router(config-if)#
```
2. 然后,您尝试退出配置模式:
```
Router(config-if)#exit
```
但是,由于未完成配置,您会收到一个错误消息。
3. 您再次进入FastEthernet1/1的配置模式,并执行以下命令来启用接口:
```
Router(config)#interface FastEthernet1/1
Router(config-if)#no shutdown
Router(config-if)#exit
```
4. 最后,您退出配置模式,保存了更改:
```
Router(config)#^Z
```
根据最新的输出,FastEthernet1/1接口的状态仍然是down。请确保接口连接正确并按预期工作。
host administratively prohibit
"host administratively prohibit" 的意思是“主机被管理上禁止”。这通常是由于网络管理员的限制或配置错误导致的,可能会导致无法连接到该主机或无法访问某些网络资源。如果您遇到此问题,请联系网络管理员以获取帮助。