STM32F103T8C6控制TFT显示
时间: 2023-05-23 18:05:20 浏览: 49
A:要控制TFT显示需要使用一些相关的驱动电路,并且需要了解TFT显示器的工作原理和接口协议。一般来说,需要使用SPI接口来控制TFT显示器,并且需要编写相应的SPI驱动程序。下面是一个简单的示例代码,使用STM32F103T8C6控制TFT显示:
```
#include "stm32f10x.h"
#define SPI_SCK_Pin GPIO_Pin_13
#define SPI_SCK_Port GPIOB
#define SPI_MISO_Pin GPIO_Pin_14
#define SPI_MISO_Port GPIOB
#define SPI_MOSI_Pin GPIO_Pin_15
#define SPI_MOSI_Port GPIOB
#define TFT_CS_Pin GPIO_Pin_0
#define TFT_CS_Port GPIOA
#define TFT_DC_Pin GPIO_Pin_1
#define TFT_DC_Port GPIOA
#define TFT_RST_Pin GPIO_Pin_2
#define TFT_RST_Port GPIOA
#define TFT_WIDTH 240
#define TFT_HEIGHT 320
void SPI1_Init(void)
{
SPI_InitTypeDef spi_init;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE);
spi_init.SPI_Mode = SPI_Mode_Master;
spi_init.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
spi_init.SPI_DataSize = SPI_DataSize_8b;
spi_init.SPI_CPOL = SPI_CPOL_Low;
spi_init.SPI_CPHA = SPI_CPHA_1Edge;
spi_init.SPI_NSS = SPI_NSS_Soft;
spi_init.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2;
SPI_Init(SPI1, &spi_init);
SPI_Cmd(SPI1, ENABLE);
}
void TFT_Init(void)
{
GPIO_InitTypeDef gpio_init;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE);
gpio_init.GPIO_Mode = GPIO_Mode_Out_PP;
gpio_init.GPIO_Speed = GPIO_Speed_2MHz;
gpio_init.GPIO_Pin = TFT_CS_Pin | TFT_DC_Pin | TFT_RST_Pin;
GPIO_Init(GPIOA, &gpio_init);
GPIO_SetBits(TFT_CS_Port, TFT_CS_Pin);
GPIO_ResetBits(TFT_DC_Port, TFT_DC_Pin);
GPIO_ResetBits(TFT_RST_Port, TFT_RST_Pin);
GPIO_SetBits(TFT_RST_Port, TFT_RST_Pin);
SPI1_Init();
}
void TFT_SendCmd(uint8_t cmd)
{
GPIO_ResetBits(TFT_DC_Port, TFT_DC_Pin);
GPIO_ResetBits(TFT_CS_Port, TFT_CS_Pin);
SPI_I2S_SendData(SPI1, cmd);
while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY) == SET);
GPIO_SetBits(TFT_CS_Port, TFT_CS_Pin);
}
void TFT_SendData(uint8_t data)
{
GPIO_SetBits(TFT_DC_Port, TFT_DC_Pin);
GPIO_ResetBits(TFT_CS_Port, TFT_CS_Pin);
SPI_I2S_SendData(SPI1, data);
while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY) == SET);
GPIO_SetBits(TFT_CS_Port, TFT_CS_Pin);
}
void TFT_SendData16(uint16_t data)
{
TFT_SendData(data >> 8);
TFT_SendData(data & 0xFF);
}
void TFT_SetAddrWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1)
{
TFT_SendCmd(0x2A);
TFT_SendData16(x0);
TFT_SendData16(x1);
TFT_SendCmd(0x2B);
TFT_SendData16(y0);
TFT_SendData16(y1);
TFT_SendCmd(0x2C);
}
void TFT_FillRect(uint16_t x, uint16_t y, uint16_t w, uint16_t h, uint16_t color)
{
uint32_t i;
TFT_SetAddrWindow(x, y, x + w - 1, y + h - 1);
for (i = 0; i < w * h; i++) {
TFT_SendData16(color);
}
}
int main(void)
{
TFT_Init();
TFT_FillRect(0, 0, TFT_WIDTH, TFT_HEIGHT, 0xFFFF);
while (1);
return 0;
}
```
这段代码实现了初始化TFT显示器,并使用TFT_SendCmd()函数和TFT_SendData()函数来控制TFT显示器的显示内容。在main()函数中,调用TFT_FillRect()函数可以实现在屏幕上绘制一个矩形。具体的代码实现可以根据实际情况进行修改。
相关推荐
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)