stm32 i2s 驱动CS4344播放WAV文件程序编写
时间: 2023-12-30 13:05:35 浏览: 85
下面是一个基于STM32的I2S驱动程序示例,使用的是硬件方式进行控制,同时结合了CS4344芯片和WAV文件进行音频播放:
```c
#include "stm32f10x.h"
#include "cs4344.h"
#include "wave.h"
void I2S_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
// 使能I2S时钟
RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI3, ENABLE);
// I2S3 GPIO 初始化
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3 | GPIO_Pin_5 | GPIO_Pin_7;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_Init(GPIOC, &GPIO_InitStructure);
// I2S3参数配置
I2S_InitTypeDef I2S_InitStructure;
I2S_InitStructure.I2S_AudioFreq = I2S_AudioFreq_44k;
I2S_InitStructure.I2S_Standard = I2S_Standard_Phillips;
I2S_InitStructure.I2S_DataFormat = I2S_DataFormat_16b;
I2S_InitStructure.I2S_CPOL = I2S_CPOL_Low;
I2S_InitStructure.I2S_Mode = I2S_Mode_MasterTx;
I2S_InitStructure.I2S_MCLKOutput = I2S_MCLKOutput_Enable;
I2S_Init(SPI3, &I2S_InitStructure);
// 使能I2S
I2S_Cmd(SPI3, ENABLE);
}
int main(void)
{
I2S_Init();
CS4344_Init();
// 加载WAV文件
wave_t wave;
uint8_t result = wave_load(&wave, "test.wav");
if (result != 0) {
// 加载失败,停止播放
while (1);
}
// 设置音量
CS4344_SetVolume(0x7F, 0x7F);
// 播放音频数据
while (1) {
uint16_t data = 0;
if (wave_read(&wave, &data, sizeof(data)) != sizeof(data)) {
// 音频数据已经播放完毕,停止播放
break;
}
SPI_I2S_SendData(SPI3, data);
while (SPI_I2S_GetFlagStatus(SPI3, SPI_I2S_FLAG_TXE) == RESET);
}
// 关闭I2S和CS4344芯片
I2S_Cmd(SPI3, DISABLE);
CS4344_WriteReg(CS4344_PWR_CTL_REG, 0x00);
while (1);
}
```
以上是一个简单的I2S驱动程序示例,其中`I2S_Init()`函数用于初始化I2S接口和GPIO,`CS4344_Init()`函数用于初始化CS4344芯片,`wave_load()`函数用于加载WAV文件,`wave_read()`函数用于读取WAV文件中的音频数据,`CS4344_SetVolume()`函数用于设置芯片的音量。在实际使用时,还需要根据具体的应用需求和系统架构进行相应的修改和配置,以确保音频能够正常播放。