linux下网口冗余配置
时间: 2023-11-06 17:06:04 浏览: 47
在 Linux 系统中,可以使用 bonding 技术实现网口冗余配置。下面是配置步骤:
1. 安装 bonding 模块:
```shell
sudo modprobe bonding
```
2. 创建 bond 接口:
```shell
sudo vim /etc/network/interfaces
```
在文件末尾添加以下内容:
```shell
auto bond0
iface bond0 inet dhcp
slaves eth0 eth1
bond-mode active-backup
bond-miimon 100
```
其中,`bond0` 是创建的 bond 接口名称,`slaves` 后面跟的是需要冗余的网口名称,`bond-mode` 指定冗余模式,这里选用了 active-backup 模式,即主备模式,`bond-miimon` 指定网络监视器的监视间隔。
3. 配置网口:
```shell
sudo vim /etc/network/interfaces
```
在文件末尾添加以下内容:
```shell
auto eth0
iface eth0 inet manual
bond-master bond0
bond-primary eth0
auto eth1
iface eth1 inet manual
bond-master bond0
```
其中,`bond-master` 指定该网口隶属于哪个 bond 接口,`bond-primary` 指定该网口为主网口。
4. 重启网络服务:
```shell
sudo service networking restart
```
完成以上步骤后,该 Linux 系统就可以实现网口冗余配置了。需要注意的是,不同的冗余模式可能会对网络性能产生不同的影响,需要根据实际情况选择适合的模式。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![whl](https://img-home.csdnimg.cn/images/20210720083646.png)
![whl](https://img-home.csdnimg.cn/images/20210720083646.png)