vhdl实现spi
时间: 2023-11-24 07:19:06 浏览: 59
SPI(Serial Peripheral Interface)是一种串行通信协议,常用于连接微控制器、存储器、传感器等设备。下面是一个简单的 VHDL 代码实现 SPI:
```
entity spi is
port (
CLK : in std_logic;
MOSI : in std_logic;
MISO : out std_logic;
SS : in std_logic;
SCK : out std_logic
);
end spi;
architecture Behavioral of spi is
signal shift_register : std_logic_vector(7 downto 0);
signal bit_counter : integer range 0 to 7 := 0;
begin
process(CLK)
begin
if rising_edge(CLK) then
if SS = '0' then
shift_register(bit_counter) <= MOSI;
bit_counter <= bit_counter + 1;
if bit_counter = 7 then
bit_counter <= 0;
MISO <= shift_register(7);
end if;
end if;
SCK <= not SCK;
end if;
end process;
end Behavioral;
```
在这个实现中,CLK 为时钟信号,MOSI 为主设备输出信号,MISO 为从设备输出信号,SS 为从设备片选信号,SCK 为时钟输出信号。当 SS 为低电平时,主设备开始向从设备发送一个字节的数据,每个时钟周期主设备输出一个比特位,从设备在相应的时钟上升沿读取主设备的输出。当一个字节的数据传输完成时,主设备将 SS 拉高,从设备停止接收数据。