stm32f103c8t6上电灯闪烁
时间: 2023-08-30 16:12:05 浏览: 95
您好!对于STM32F103C8T6微控制器,下面是一个简单的代码示例,用于在上电时使LED灯闪烁:
```c
#include "stm32f10x.h"
#define LED_PIN GPIO_Pin_13
#define LED_GPIO GPIOC
void delay(uint32_t time) {
while(time--);
}
int main(void) {
// 初始化GPIO
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);
GPIO_InitStructure.GPIO_Pin = LED_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(LED_GPIO, &GPIO_InitStructure);
// 持续闪烁LED
while(1) {
GPIO_SetBits(LED_GPIO, LED_PIN);
delay(500000);
GPIO_ResetBits(LED_GPIO, LED_PIN);
delay(500000);
}
}
```
这段代码通过控制GPIOC的Pin 13引脚来控制LED灯的亮灭。在循环中,先将LED引脚置高(点亮LED),然后延时500000个周期,再将LED引脚置低(熄灭LED),再延时500000个周期。这样循环进行下去,就可以实现LED的闪烁效果。
请注意,以上代码是基于标准库的示例,您需要确保已经正确配置了开发环境和相应的库文件。如果您使用的是其他开发工具或库,请适当修改代码以适应您的环境。
希望对您有帮助,如果还有其他问题,请随时提问!
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)