cortex M3怎么点灯
时间: 2023-08-11 20:06:56 浏览: 45
点灯的具体实现方法需要根据你使用的具体开发板和编程语言来确定。一般来说,使用C语言编写程序,在cortex M3芯片的寄存器中设置相应的引脚状态即可实现点灯功能。以下是一个简单的示例代码:
```c
#include "stm32f10x.h" //包含STM32F10x系列芯片的头文件
int main(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
//开启GPIOA和GPIOC的时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOC, ENABLE);
//配置PA8为推挽输出
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
//配置PC13为推挽输出
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOC, &GPIO_InitStructure);
while(1)
{
//点亮PA8和PC13引脚的LED灯
GPIO_SetBits(GPIOA, GPIO_Pin_8);
GPIO_SetBits(GPIOC, GPIO_Pin_13);
}
}
```
以上代码是基于STM32F10x系列芯片的,其中PA8和PC13分别对应开发板上的两个LED灯。具体实现方法可能因开发板的不同而有所不同,你需要根据自己的实际情况进行调整。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)