基于at89c51的数码管0-9循环显示控制
时间: 2024-04-17 15:24:37 浏览: 117
您好!对于基于AT89C51的数码管0-9循环显示控制,您可以使用以下步骤进行实现:
1. 连接硬件:将数码管连接到AT89C51的IO口。通常,数码管的每个段(a-g)通过一个IO口连接,而每个数码管通过共阳(或共阴)连接。确保正确连接并设置适当的引脚。
2. 编写程序:使用汇编语言或C语言编写程序来控制数码管的显示。以下是一个示例C语言程序:
```c
#include <REG51.H> // 包含AT89C51的寄存器定义
// 定义数码管段码
unsigned char digitCode[] = {0xC0, 0xF9, 0xA4, 0xB0, 0x99, 0x92, 0x82, 0xF8, 0x80, 0x90};
void delay(unsigned int ms) {
unsigned int i, j;
for (i = 0; i < ms; i++) {
***
相关问题
at89c51数码管动态显示0-9
下面是一个基于AT89C51单片机的数码管动态显示0-9的简单程序:
```
#include <reg51.h> // 引入AT89C51的寄存器定义
// 数码管段选信号定义
#define SEG_A P1_0
#define SEG_B P1_1
#define SEG_C P1_2
#define SEG_D P1_3
#define SEG_E P1_4
#define SEG_F P1_5
#define SEG_G P1_6
#define SEG_DP P1_7
// 数码管位选信号定义
#define DIGIT_1 P2_0
#define DIGIT_2 P2_1
#define DIGIT_3 P2_2
#define DIGIT_4 P2_3
// 数码管显示的数字
unsigned char digits[10] = {
0xC0, // 0
0xF9, // 1
0xA4, // 2
0xB0, // 3
0x99, // 4
0x92, // 5
0x82, // 6
0xF8, // 7
0x80, // 8
0x90 // 9
};
void delay(unsigned int ms) { // 简单延时函数
unsigned int i, j;
for (i = 0; i < ms; i++) {
for (j = 0; j < 120; j++);
}
}
void main() {
unsigned char i;
while (1) {
for (i = 0; i < 10; i++) { // 循环显示0-9
SEG_A = digits[i] & 0x01;
SEG_B = (digits[i] >> 1) & 0x01;
SEG_C = (digits[i] >> 2) & 0x01;
SEG_D = (digits[i] >> 3) & 0x01;
SEG_E = (digits[i] >> 4) & 0x01;
SEG_F = (digits[i] >> 5) & 0x01;
SEG_G = (digits[i] >> 6) & 0x01;
SEG_DP = (digits[i] >> 7) & 0x01;
DIGIT_1 = 1; // 显示第1位,其他位为0
DIGIT_2 = 0;
DIGIT_3 = 0;
DIGIT_4 = 0;
delay(10);
SEG_A = SEG_B = SEG_C = SEG_D = SEG_E = SEG_F = SEG_G = SEG_DP = 1;
DIGIT_1 = 0;
DIGIT_2 = 1; // 显示第2位,其他位为0
DIGIT_3 = 0;
DIGIT_4 = 0;
delay(10);
SEG_A = SEG_B = SEG_C = SEG_D = SEG_E = SEG_F = SEG_G = SEG_DP = 1;
DIGIT_1 = 0;
DIGIT_2 = 0;
DIGIT_3 = 1; // 显示第3位,其他位为0
DIGIT_4 = 0;
delay(10);
SEG_A = SEG_B = SEG_C = SEG_D = SEG_E = SEG_F = SEG_G = SEG_DP = 1;
DIGIT_1 = 0;
DIGIT_2 = 0;
DIGIT_3 = 0;
DIGIT_4 = 1; // 显示第4位,其他位为0
delay(10);
}
}
}
```
这个程序中使用了P1和P2端口来控制数码管的段选和位选信号,通过循环显示0-9来实现动态显示效果。在每次显示一个数字时,先将对应的段选信号设置为0,其他的段选信号设置为1,然后设置对应的位选信号为1,其他的位选信号设置为0,延时一段时间后再将所有的段选信号和位选信号都设置为1。重复这个过程来实现动态显示的效果。
用单片机AT89C51共阴极数码管循环显示0-9
好的,我可以帮你解答这个问题。
首先,AT89C51是一种常用的单片机,我们可以通过程序控制单片机的输出来控制共阴极数码管的显示。
其次,共阴极数码管是一种常见的电子显示器件,它由多个LED组成,可以显示0-9等数字。共阴极数码管的每个LED负极都连接在一起,需要通过单片机的输出控制每个LED的正极来实现数字的显示。
下面是一个简单的程序,可以实现共阴极数码管循环显示0-9:
```c
#include <reg51.h>
unsigned char code table[] = {
0xC0, // 显示0
0xF9, // 显示1
0xA4, // 显示2
0xB0, // 显示3
0x99, // 显示4
0x92, // 显示5
0x82, // 显示6
0xF8, // 显示7
0x80, // 显示8
0x90 // 显示9
};
void delay(unsigned int i) // 延时函数
{
unsigned int j;
while (i--)
for (j = 0; j < 1000; j++);
}
void main()
{
unsigned char i = 0;
while (1)
{
P2 = table[i]; // 显示当前数字
delay(500); // 延时一段时间
i = (i + 1) % 10; // 循环显示0-9
}
}
```
在这个程序中,我们使用了一个数组来存储0-9的显示码,然后通过循环来控制每个数字的显示。程序的主要思路是:
1. 设置一个数组,存储0-9的显示码。
2. 循环显示0-9,每次显示一个数字。
3. 在显示数字的同时,延时一段时间,使数字可以持续显示。
需要注意的是,具体的控制方式和延时时间可能需要根据不同的数码管和硬件环境进行调整。
相关推荐
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)