为了防止交换机E12端口用户的非法接入,同时防御网络的ARP欺骗,从而有效的避免IP地址的冲突命令
时间: 2024-03-07 20:47:08 浏览: 21
下面是一些常用的命令:
1. 配置端口安全特性:
```
switch(config)# interface e12
switch(config-if)# switchport port-security
switch(config-if)# switchport port-security maximum 2
switch(config-if)# switchport port-security violation restrict
switch(config-if)# switchport port-security mac-address sticky
```
以上命令将E12端口配置为启用端口安全特性,限制端口最大允许连接的MAC地址数量为2,违规操作时限制端口,启用sticky模式将学习到的MAC地址绑定到端口。
2. 配置802.1X认证:
```
switch(config)# aaa new-model
switch(config)# radius-server host 192.168.1.10 key password
switch(config)# interface e12
switch(config-if)# authentication port-control auto
switch(config-if)# dot1x port-control auto
switch(config-if)# dot1x guest-vlan 10
```
以上命令启用AAA认证模型,配置radius服务器地址和密码,将E12端口配置为启用802.1X认证,未认证用户放置到VLAN 10中。
3. 配置静态ARP表项:
```
switch(config)# arp 10.0.0.2 0011.2233.4455 arpa
```
以上命令将IP地址10.0.0.2和MAC地址0011.2233.4455进行绑定。
4. 配置DHCP Snooping:
```
switch(config)# ip dhcp snooping vlan 1-10
switch(config)# interface range e1-e24
switch(config-if)# ip dhcp snooping trust
```
以上命令启用DHCP Snooping功能,并将VLAN 1-10设置为受保护的VLAN,将E1-E24端口配置为信任端口。
5. 配置端口镜像:
```
switch(config)# monitor session 1 source interface e12
switch(config)# monitor session 1 destination interface e24
```
以上命令将E12端口的流量镜像到E24端口进行监测和分析。
6. 更新交换机固件和补丁:
请根据具体交换机型号和厂商提供的文档进行操作。