基于51单片机的pwm调光程序
时间: 2023-12-24 08:04:22 浏览: 44
下面是一个基于51单片机的PWM调光程序的简单实现:
```
#include <reg51.h>
unsigned char duty;
void delay(unsigned int t)
{
while(t--);
}
void PWM_Init()
{
TMOD &= 0xF0;
TMOD |= 0x01;
TH0 = 0xFC;
TL0 = 0x67;
TR0 = 1;
ET0 = 1;
EA = 1;
}
void Timer0_Interrupt() interrupt 1
{
TH0 = 0xFC;
TL0 = 0x67;
if(duty == 0)
{
P1 = 0xFF;
}
else
{
P1 = ~duty;
}
}
void main()
{
PWM_Init();
while(1)
{
for(duty = 0; duty < 256; duty++)
{
delay(1000);
}
}
}
```
在这个程序中,我们使用了51单片机的定时器0,并在定时器中断函数中实现了PWM调光的功能。调光的步长由`duty`变量控制,每次循环都会把`duty`的值增加1,从而实现了PWM调光的效果。
相关问题
51单片机pwm按键调光程序以及原理图
以下是51单片机基于按键实现PWM调光的程序代码及原理图:
程序代码:
```c
#include <reg52.h>
#include <intrins.h>
#define uint unsigned int
#define uchar unsigned char
#define LED P2
sbit S1 = P1^0;
sbit S2 = P1^1;
uchar pwm = 0;
void delay(uint xms) //延时函数
{
uint i,j;
for(i=xms;i>0;i--)
for(j=110;j>0;j--);
}
void pwm_out() //PWM输出函数
{
uchar i;
for(i=0;i<100;i++) //循环100次,控制占空比
{
if(i < pwm)
LED = 0;
else
LED = 1;
delay(1); //延时1ms
}
}
void main()
{
S1 = 1;
S2 = 1;
while(1)
{
if(S1 == 0) //按下S1
{
delay(10); //延时10ms
if(S1 == 0) //再次检测S1是否按下
{
pwm++; //占空比加1
if(pwm > 99) //占空比不能大于99
pwm = 99;
}
while(!S1); //等待S1释放
}
if(S2 == 0) //按下S2
{
delay(10); //延时10ms
if(S2 == 0) //再次检测S2是否按下
{
pwm--; //占空比减1
if(pwm < 0) //占空比不能小于0
pwm = 0;
}
while(!S2); //等待S2释放
}
pwm_out(); //PWM输出
}
}
```
原理图:
![51单片机pwm按键调光原理图](https://img-blog.csdn.net/20180418195102575?watermark/2/text/aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L2xlZmVudG9u/font/5a6L5L2T/fontsize/400/fill/I0JBQkFCMA==/dissolve/70/q/75)
51单片机pwm按键调光
要实现51单片机pwm按键调光,你可以按照以下步骤进行:
1. 首先,需要使用51单片机的定时器和PWM功能。在程序中进行相应的初始化。
2. 然后,在主程序中设置一个中断函数,用于检测按键是否被按下。
3. 在中断函数中,根据按键的不同,对PWM占空比进行相应的改变。
4. 最后,在主程序中添加一个循环,用于不断更新PWM占空比,实现调光效果。
以下是一个简单的示例代码:
```c
#include <reg51.h>
sbit key = P3^2; // 定义按键
void init_timer() // 初始化定时器和PWM
{
TMOD |= 0x01; // 设置定时器0为16位计数器
TH0 = 0xFC; // 设置计数初值,定时1ms
TL0 = 0x67;
ET0 = 1; // 打开定时器0中断
TR0 = 1; // 启动定时器0
TMOD |= 0x10; // 设置定时器1为8位自动重载定时器
TH1 = TL1 = 0; // 初值为0
ET1 = 1; // 打开定时器1中断
TR1 = 1; // 启动定时器1
P1 = 0x00; // 初始占空比为0
PWM1 = 1; // 打开PWM输出
}
void main()
{
init_timer();
EA = 1; // 打开总中断
while(1)
{
// 循环更新PWM占空比
for(int i = 0; i <= 100; i++)
{
CCAP1H = i;
CCAP1L = i << 2;
delay(10); // 延时一段时间,可根据需要调整
}
}
}
void timer0() interrupt 1 // 定时器0中断
{
static int cnt = 0;
TH0 = 0xFC;
TL0 = 0x67;
cnt++;
if(cnt == 100) // 按键检测间隔为100ms
{
cnt = 0;
if(key == 0) // 检测按键是否按下
{
// 改变PWM占空比
CCAP1H -= 10;
CCAP1L -= 40;
}
}
}
void timer1() interrupt 3 // 定时器1中断
{
TF1 = 0;
}
void delay(int n) // 延时函数
{
int i, j;
for(i = n; i > 0; i--)
for(j = 110; j > 0; j--);
}
```
注意:以上代码仅供参考,实际应用中可能需要根据需要进行修改和优化。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)