stm32智能家居的代码
时间: 2023-09-05 08:13:25 浏览: 31
智能家居包含很多功能,不同的功能对应不同的代码,下面我以控制灯的开关为例,给出一个基于STM32的智能家居代码:
```c
#include "stm32f10x.h"
#define LED_GPIO GPIOB
#define LED_PIN GPIO_Pin_12
void GPIO_Configuration(void);
int main(void)
{
GPIO_Configuration();
while (1)
{
if(GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_0) == 0) // 检测是否按下按键
{
GPIO_WriteBit(LED_GPIO, LED_PIN, (BitAction)(1 - GPIO_ReadOutputDataBit(LED_GPIO, LED_PIN))); // 翻转LED灯
while(GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_0) == 0); // 等待按键松开
}
}
}
void GPIO_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE);
// 配置LED引脚为输出模式
GPIO_InitStructure.GPIO_Pin = LED_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(LED_GPIO, &GPIO_InitStructure);
// 配置按键引脚为输入模式
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
GPIO_Init(GPIOA, &GPIO_InitStructure);
}
```
这段代码实现了当按下按键时控制LED灯的开关,需要在硬件上接好按键和LED灯的引脚。如果想要实现更多功能,需要根据具体需求编写相应代码。