vhdl16×16点阵
时间: 2023-07-25 21:03:43 浏览: 37
您的问题是关于 VHDL 代码实现一个 16x16 点阵的吗?
以下是一个简单的 VHDL 代码实现一个 16x16 点阵的示例:
```
entity dot_matrix is
port(
clk : in std_logic;
reset : in std_logic;
x : in std_logic_vector(3 downto 0);
y : in std_logic_vector(3 downto 0);
dot : out std_logic
);
end entity dot_matrix;
architecture behavioral of dot_matrix is
type dot_array is array(0 to 15, 0 to 15) of std_logic;
signal dots : dot_array;
begin
process(clk, reset)
begin
if reset = '1' then
dots <= (others => (others => '0'));
elsif rising_edge(clk) then
if x <= 15 and y <= 15 then
dot <= dots(to_integer(unsigned(x)), to_integer(unsigned(y)));
else
dot <= '0';
end if;
end if;
end process;
end architecture behavioral;
```
这个代码定义了一个名为 `dot_matrix` 的实体,该实体具有时钟信号 `clk`、复位信号 `reset`、输入信号 `x` 和 `y`,以及输出信号 `dot`。 `x` 和 `y` 分别是 4 位二进制数,表示要显示的点的横纵坐标, `dot` 是一个单个信号,表示选定点是否应该亮起。
在内部实现中,我们定义了一个二维数组 `dots`,用于存储点阵的状态。 `dots` 由 `dot_array` 类型定义,该类型是一个 16x16 的布尔数组。在 `process` 中,我们检查 `x` 和 `y` 的值是否小于或等于 15,如果是,则将 `dot` 设置为 `dots` 中对应的值。否则,我们将 `dot` 设置为 0。
这只是一个简单的示例代码,可能需要根据您的具体需求进行修改。希望这可以帮助您入门 VHDL 点阵的实现。