ipv6 ospf配置锐捷

以下是IPv6 OSPF配置锐捷的步骤：

1. 配置IPv6地址和启用IPv6路由功能：

[R2] ipv6 enable
[R2] interface Tunnel0/0/0
[R2-Tunnel0/0/0] ipv6 enable
[R2-Tunnel0/0/0] ipv6 address 2001:DB8:0:2::1/64
[R2-Tunnel0/0/0] tunnel-protocol ipv6
[R2-Tunnel0/0/0] tunnel destination 203.0.113.2
[R2-Tunnel0/0/0] tunnel source 192.0.2.2
[R2-Tunnel0/0/0] quit

[R4] ipv6 enable
[R4] interface Tunnel0/0/0
[R4-Tunnel0/0/0] ipv6 enable
[R4-Tunnel0/0/0] ipv6 address 2001:DB8:0:4::1/64
[R4-Tunnel0/0/0] tunnel-protocol ipv6
[R4-Tunnel0/0/0] tunnel destination 192.0.2.2
[R4-Tunnel0/0/0] tunnel source 203.0.113.2
[R4-Tunnel0/0/0] quit

2. 配置OSPF进程和区域：

[R2] ospfv3 1 ipv6 area 0.0.0.0
[R4] ospfv3 1 ipv6 area 0.0.0.0

3. 配置OSPF网络：

[R2] interface Tunnel0/0/0
[R2-Tunnel0/0/0] ospfv3 1 ipv6 cost 10
[R2-Tunnel0/0/0] quit

[R4] interface Tunnel0/0/0
[R4-Tunnel0/0/0] ospfv3 1 ipv6 cost 10
[R4-Tunnel0/0/0] quit

4. 配置默认路由：

[R2] ipv6 route ::/0 tunnel 0
[R4] ipv6 route ::/0 tunnel 0

注意：以上仅为示例配置，实际配置需要根据网络拓扑和需求进行调整。