stm32f103c6t6产生可调整相位的PWM波的程序代码

以下是一个用于产生可调整相位的PWM波的示例代码，适用于stm32f103c6t6：

#include "stm32f10x.h"

void PWM_Init(void);

int main(void)
{
  PWM_Init();
  while (1)
  {
    // 在这里添加需要执行的代码
  }
}

void PWM_Init(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;
  TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
  TIM_OCInitTypeDef TIM_OCInitStructure;

  // 使能TIM2和GPIOA的时钟
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);

  // 配置PA0为TIM2的通道1输出
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_Init(GPIOA, &GPIO_InitStructure);

  // 初始化TIM2
  TIM_TimeBaseStructure.TIM_Period = 999; // 设置周期为1000
  TIM_TimeBaseStructure.TIM_Prescaler = 71; // 设置预分频为72
  TIM_TimeBaseStructure.TIM_ClockDivision = 0;
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
  TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);

  // 初始化TIM2的通道1输出
  TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
  TIM_OCInitStructure.TIM_Pulse = 500; // 设置占空比为50%
  TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
  TIM_OC1Init(TIM2, &TIM_OCInitStructure);

  // 使能TIM2
  TIM_Cmd(TIM2, ENABLE);
}

这段代码使用了stm32f103c6t6的TIM2模块产生PWM波，并通过TIM2的通道1输出到PA0引脚。您可以根据需要更改周期、预分频和占空比的值。