esp8266使用串口2
时间: 2023-10-28 21:16:45 浏览: 64
好的,以下是一个使用ESP8266通过STM32的串口2通信的示例代码:
```c
#include "stm32f10x.h"
#include "usart.h" // 串口驱动库
#define ESP8266_USART USART2 // 定义使用的USART
#define ESP8266_BAUDRATE 115200 // 定义ESP8266的波特率
void ESP8266_Init(void)
{
USART_InitTypeDef USART_InitStructure;
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE); // 使能USART2时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); // 使能GPIOA时钟
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; // PA2为USART2的TX引脚
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; // 复用推挽输出
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
USART_InitStructure.USART_BaudRate = ESP8266_BAUDRATE;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Tx;
USART_Init(ESP8266_USART, &USART_InitStructure);
USART_Cmd(ESP8266_USART, ENABLE);
}
int main(void)
{
ESP8266_Init();
while (1)
{
USART_SendData(ESP8266_USART, 'A');
while (USART_GetFlagStatus(ESP8266_USART, USART_FLAG_TXE) == RESET);
delay_ms(500); // 发送完毕后等待一段时间
USART_SendData(ESP8266_USART, 'B');
while (USART_GetFlagStatus(ESP8266_USART, USART_FLAG_TXE) == RESET);
delay_ms(500); // 发送完毕后等待一段时间
}
}
```
在该代码中,我们将使用USART2作为与ESP8266通信的接口,并通过ESP8266_Init函数对USART2进行初始化。在主函数中,我们通过USART_SendData函数向ESP8266发送数据,并通过USART_GetFlagStatus函数检查发送是否完成。需要注意的是,在每次发送完毕后我们都需要等待一段时间,否则可能会影响ESP8266的响应。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)