STM32F103C8T6连接ESP8266软件设计
时间: 2023-06-11 14:08:11 浏览: 301
stm32f103c8t6通过ESP8266上传温湿度,MQ2、甲醛到阿里云,并控制下发风扇开启。MQ2阈值蜂鸣器报警、甲醛蜂鸣
5星 · 资源好评率100%
连接STM32F103C8T6和ESP8266需要使用串口通信。你可以使用STM32F103C8T6的USART模块和ESP8266的串口模块进行通信。
以下是一个简单的程序示例,可用于在STM32F103C8T6和ESP8266之间进行串口通信:
```c
#include "stm32f10x.h"
#include <string.h>
#define USART_BAUDRATE 9600
#define AP_SSID "Your_AP_SSID"
#define AP_PASSWORD "Your_AP_PASSWORD"
#define SERVER_IP "Server_IP_Address"
#define SERVER_PORT 80
void USART_Init(void);
void USART_SendString(char* str);
void delay_ms(uint32_t nTime);
int main(void)
{
USART_Init();
// 连接WiFi网络
USART_SendString("AT+CWJAP=\"" AP_SSID "\",\"" AP_PASSWORD "\"\r\n");
delay_ms(1000);
// 建立TCP连接
USART_SendString("AT+CIPSTART=\"TCP\",\"" SERVER_IP "\",\"" SERVER_PORT "\"\r\n");
delay_ms(1000);
// 发送数据
USART_SendString("AT+CIPSEND=4\r\n");
delay_ms(1000);
USART_SendString("test");
while(1);
}
void USART_Init()
{
GPIO_InitTypeDef GPIO_InitStruct;
USART_InitTypeDef USART_InitStruct;
NVIC_InitTypeDef NVIC_InitStruct;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_USART1, ENABLE);
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStruct);
USART_InitStruct.USART_BaudRate = USART_BAUDRATE;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Tx | USART_Mode_Rx;
USART_Init(USART1, &USART_InitStruct);
NVIC_InitStruct.NVIC_IRQChannel = USART1_IRQn;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStruct);
USART_Cmd(USART1, ENABLE);
}
void USART_SendString(char* str)
{
uint16_t len = strlen(str);
for(int i=0; i<len; i++)
{
USART_SendData(USART1, str[i]);
while(USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET);
}
}
void delay_ms(uint32_t nTime)
{
uint32_t TimingDelay = nTime * 1000;
while(TimingDelay != 0)
{
TimingDelay--;
}
}
```
请注意,此示例仅用于演示如何在STM32F103C8T6和ESP8266之间进行串口通信。您需要根据您的实际情况修改代码,包括WiFi网络名称、密码、服务器IP地址和端口号等。
阅读全文