页断裂(partial write)与doublewrite技术
时间: 2023-07-16 21:13:06 浏览: 92
页断裂(partial write)是指在写入磁盘时,只有部分数据被写入,导致原本应该是一个完整的数据页变成了两个或多个不完整的数据页。这种情况可能会发生在系统崩溃或磁盘故障等异常情况下。
Doublewrite技术是一种预防页断裂的技术。它在写入磁盘时,首先将数据写入一个临时的缓冲区(称为doublewrite buffer),然后再将这个缓冲区的数据一次性写入磁盘。这种方式可以避免页断裂,因为即使在写入过程中出现异常,也只会导致doublewrite buffer中的数据丢失,而原始数据不会受到影响。如果在写入过程中出现异常,系统会在下一次启动时自动恢复doublewrite buffer中的数据。
Doublewrite技术主要应用于数据库系统中,因为数据库的数据一般都是以页为单位进行读写的。如果发生了页断裂,可能会导致数据的损坏或丢失,从而影响数据库的一致性和可靠性。使用Doublewrite技术可以减少这种风险,提高系统的可靠性和稳定性。
相关问题
esp32 Partial data write into ADV
I assume you are asking about how to write partial data into the advertisement (ADV) data of an ESP32 device. To do this, you can use the `esp_ble_gap_config_adv_data_raw()` function to set the raw advertisement data. Here's an example code snippet that shows how to set a partial advertisement data:
```
// define your partial advertisement data
uint8_t adv_data[] = {0x02, 0x01, 0x06, 0x03, 0x19, 0xc1, 0x03};
// set the partial advertisement data
esp_err_t ret = esp_ble_gap_config_adv_data_raw(adv_data, sizeof(adv_data));
if (ret != ESP_OK) {
// handle error
}
```
In this example, the `adv_data` array contains the partial advertisement data that you want to send. The `sizeof(adv_data)` parameter specifies the size of the partial advertisement data. The `esp_ble_gap_config_adv_data_raw()` function sets the raw advertisement data using the given `adv_data` array. Note that this function overwrites the entire advertisement data, so you need to include any other data that you want to advertise in the `adv_data` array.
mmc write_reliability set
"mmc write_reliability set"是一个用于设置eMMC写入可靠性的命令。该命令可以设置eMMC的写入保护级别,以确保数据的可靠性。
具体来说,"mmc write_reliability set"命令可以设置以下几种写入保护级别:
1. 关闭写入保护:
```
sudo mmc write_reliability set /dev/mmcblk0 off
```
该命令可以关闭eMMC的写入保护,允许进行任意写入操作。但是这种设置会降低数据的可靠性,不建议长期使用。
2. 低级别写入保护:
```
sudo mmc write_reliability set /dev/mmcblk0 partial
```
该命令可以设置eMMC的低级别写入保护,对写入操作进行限制。在进行写入操作时,eMMC会自动进行数据校验和坏块管理,以确保数据的正确性。
3. 高级别写入保护:
```
sudo mmc write_reliability set /dev/mmcblk0 full
```
该命令可以设置eMMC的高级别写入保护,对写入操作进行更加严格的限制。在进行写入操作时,eMMC会进行数据校验、坏块检测和标记等操作,以确保数据的可靠性。
需要注意的是,"mmc write_reliability set"命令需要以root权限运行,并且只能在Linux系统中使用。在进行eMMC写入操作时,建议设置适当的写入保护级别,以确保数据的可靠性。