c语言实现在arm linux下的串口全双工通信
时间: 2023-03-21 16:02:24 浏览: 113
您好,关于C语言在Armlinux下的串口全双工通信的实现,可以通过以下步骤进行:
1. 打开串口设备文件
可以使用open函数打开串口设备文件,例如:
int fd;
fd = open("/dev/ttyS0", O_RDWR | O_NOCTTY | O_NDELAY);
if (fd == -1)
{
perror("open_port: Unable to open /dev/ttyS0 - ");
return (-1);
}
2. 配置串口参数
可以使用termios结构体来配置串口的参数,例如:
struct termios options;
tcgetattr(fd, &options);
cfsetispeed(&options, B9600);
cfsetospeed(&options, B9600);
options.c_cflag |= (CLOCAL | CREAD);
options.c_cflag &= ~PARENB;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
options.c_cflag &= ~(IXON | IXOFF | IXANY);
options.c_cflag &= ~CRTSCTS;
options.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP | INLCR | IGNCR | ICRNL | IXON);
options.c_oflag &= ~OPOST;
options.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
options.c_cc[VMIN] = 1;
options.c_cc[VTIME] = 0;
tcsetattr(fd, TCSANOW, &options);
3. 发送和接收数据
使用write函数向串口发送数据,使用read函数从串口接收数据,例如:
char buf[255];
write(fd, "Hello", 5);
read(fd, buf, 255);
以上就是C语言实现在Armlinux下的串口全双工通信的基本步骤,具体实现还需要根据实际需求进行调整。