请帮我给这段代码增加一个数量为5次的循环,并使其每执行一次循环便输出成功信息:import os import time if __name__ == '\_\_main\_\_': path = '~/yumi/camcap/' folder = f'{path}/{time.strftime("%Y%m%d")}' if not os.path.exists(folder): os.mkdir(folder) # 拍照 os.system( f'fswebcam -d /dev/video1 --no-banner --flip v -r 1920*1080 --delay 3 --skip 10 {folder}/{time.strftime("%Y%m%d%H%M%S")}.jpg' ) print(‘camcap successful’)
时间: 2023-06-18 07:02:47 浏览: 101
好的,这是增加循环的代码:
```python
import os
import time
if __name__ == '__main__':
path = '~/yumi/camcap/'
folder = f'{path}/{time.strftime("%Y%m%d")}'
if not os.path.exists(folder):
os.mkdir(folder)
for i in range(5):
# 拍照
os.system(
f'fswebcam -d /dev/video1 --no-banner --flip v -r 1920*1080 --delay 3 --skip 10 {folder}/{time.strftime("%Y%m%d%H%M%S")}.jpg'
)
print('camcap successful')
```
这会使代码循环执行5次,并且每次执行循环都会输出 "camcap successful" 的信息。
相关问题
java写一个二十人,数到第七个就排除第七个的代码循环十次
### 回答1:
以下是 Java 代码实现:
```java
public class Game {
public static void main(String[] args) {
int n = 20; // 总人数
int k = 7; // 数到第 k 个人出列
int count = ; // 记录已经数过的人数
int index = ; // 记录当前位置
boolean[] arr = new boolean[n]; // 标记每个人是否出列
while (count < n - 1) { // 只剩下一个人时结束循环
for (int i = ; i < k; i++) { // 数到第 k 个人
while (arr[index]) { // 如果当前位置已经出列,继续往后找
index = (index + 1) % n;
}
index = (index + 1) % n; // 找到下一个未出列的人
}
index = (index + n - 1) % n; // 找到要出列的人
arr[index] = true; // 标记出列
count++; // 已经出列的人数加一
System.out.println("第 " + count + " 个出列的人是:" + (index + 1));
index = (index + 1) % n; // 从下一个人开始数
}
for (int i = ; i < n; i++) { // 找到最后一个未出列的人
if (!arr[i]) {
System.out.println("最后留下的人是:" + (i + 1));
break;
}
}
}
}
```
### 回答2:
以下是使用Java编写的代码,实现二十个人数到第七个就排除第七个的循环十次:
```java
public class ExcludeSeventh {
public static void main(String[] args) {
int count = 1; // 当前数到的人的编号
int eliminated = 0; // 已被排除的人的数量
for (int i = 0; i < 10; i++) { // 循环十次
boolean[] people = new boolean[20]; // 标记每个人是否被排除,默认为false
while (eliminated < 20) { // 当还有人未被排除时
int current = count % 20; // 当前数到的人在数组中的索引
if (!people[current]) { // 当前人未被排除
if (count % 7 == 0) { // 数到第七个
people[current] = true; // 排除第七个
eliminated++;
}
count++;
} else {
count++; // 已被排除的人,继续数下一个
}
}
}
System.out.println("排除第七个的循环十次后剩下的人:");
for (int i = 0; i < 20; i++) {
if (!people[i]) { // 输出未被排除的人的编号
System.out.print((i + 1) + " ");
}
}
}
}
```
上述代码首先使用一个布尔数组`people`来标记每个人是否被排除,初始时都为`false`,表示未排除。`count`变量用于记录当前数到的人的编号,`eliminated`变量用于记录已被排除的人的数量。
使用嵌套的`for`循环,外循环表示循环十次,内循环表示每次循环排除人的过程。内循环中,通过计算`count`对数组长度取模的结果,确定当前数到的人在数组中的索引位置。如果当前人未被排除,则判断是否是第七个人,如果是,则将对应的数组元素设置为`true`表示排除,同时`eliminated`数量加一;如果不是第七个人,则`count`加一。
循环执行直到所有人都被排除后,结束内循环。最后,输出排除第七个的循环十次后剩下的人的编号。
### 回答3:
以下是一个使用Java编写的程序,实现了二十人数到第七个就排除第七个的循环十次的功能。
```java
public class ExcludeSeventhPerson {
public static void main(String[] args) {
int numPeople = 20;
int targetCount = 7;
int numRounds = 10;
// 创建一个长度为20的数组,存储人员编号
int[] people = new int[numPeople];
for (int i = 0; i < numPeople; i++) {
people[i] = i + 1;
}
// 进行循环排除操作
for (int round = 1; round <= numRounds; round++) {
int count = 0; // 计数器,用于判断数到第几个人
int eliminationIndex = -1; // 待排除人员的索引
// 循环遍历人员数组
for (int i = 0; i < numPeople; i++) {
// 如果当前人员未被排除,则进行数数操作
if (people[i] != 0) {
count++;
// 如果数到第七个人,则记录该人员的索引
if (count == targetCount) {
eliminationIndex = i;
break;
}
}
}
// 输出被排除人员的编号
System.out.println("第 " + round + " 轮被排除的人员编号:" + people[eliminationIndex]);
// 将被排除人员的编号设为0,表示已排除
people[eliminationIndex] = 0;
}
}
}
```
这段代码首先创建一个长度为20的数组,表示二十个人的编号。然后,使用两层循环来进行排除操作:外层循环控制十轮排除,内层循环用于数到第七个人。在每一轮中,根据数到的第七个人的索引,将该人员的编号设为0,表示已排除。最后,输出每一轮被排除的人员编号。
注意,这里的人员编号从1开始,而不是从0开始。
用tcl语言写一段代码,内容是将boundary为{{0 0}{1000 1000} }的区域分割成5x5的若干方块,并输出每个方块的boundary
### 回答1:
答:set x0 0
set y0 0
set x1 1000
set y1 1000
set stepX [expr ($x1 - $x0) / 5]
set stepY [expr ($y1 - $y0) / 5]for {set i 0} {$i < 5} {incr i} {
for {set j 0} {$j < 5} {incr j} {
set x_min [expr $x0 + $i * $stepX]
set y_min [expr $y0 + $j * $stepY]
set x_max [expr $x0 + ($i + 1) * $stepX]
set y_max [expr $y0 + ($j + 1) * $stepY]
puts "boundary:{{$x_min $y_min}{$x_max $y_max}}"
}
}
### 回答2:
使用Tcl语言可以通过循环和计算来实现将指定区域分割成5x5的若干方块,并输出每个方块的boundary。以下是实现这个功能的代码示例:
```tcl
set startX 0
set startY 0
set endX 1000
set endY 1000
set squareWidth [expr {($endX - $startX) / 5}]
set squareHeight [expr {($endY - $startY) / 5}]
for {set i 0} {$i < 5} {incr i} {
for {set j 0} {$j < 5} {incr j} {
set squareStartX [expr {$startX + $i * $squareWidth}]
set squareStartY [expr {$startY + $j * $squareHeight}]
set squareEndX [expr {$squareStartX + $squareWidth}]
set squareEndY [expr {$squareStartY + $squareHeight}]
set boundary "{{$squareStartX $squareStartY} {$squareEndX $squareEndY}}"
puts "方块 [$i,$j] 的boundary为:$boundary"
}
}
```
以上代码通过两层循环,分别控制横向和纵向的方块数量,然后根据当前方块的位置,通过计算得到每个方块的起始坐标和结束坐标,并将其整理成boundary的格式输出。输出的结果会显示每个方块的boundary。
### 回答3:
使用Tcl语言,可以使用以下代码将boundary为{{0 0}{1000 1000}}的区域分割成5x5的若干方块,并输出每个方块的boundary:
```tcl
set min_x 0
set min_y 0
set max_x 1000
set max_y 1000
set num_x 5
set num_y 5
set step_x [expr {($max_x - $min_x) / $num_x}]
set step_y [expr {($max_y - $min_y) / $num_y}]
for {set i 0} {$i < $num_x} {incr i} {
for {set j 0} {$j < $num_y} {incr j} {
set start_x [expr {$min_x + ($i * $step_x)}]
set start_y [expr {$min_y + ($j * $step_y)}]
set end_x [expr {$start_x + $step_x}]
set end_y [expr {$start_y + $step_y}]
set boundary "{{${start_x} ${start_y}} {${end_x} ${end_y}}}"
puts "方块 [$i,$j] 的boundary为 $boundary"
}
}
```
其中,min_x和min_y表示区域的左上角坐标,max_x和max_y表示区域的右下角坐标,num_x和num_y表示水平和垂直方向要分割的方块数量。
代码将使用嵌套的for循环来对区域进行分割,并计算每个方块的起始坐标和终止坐标。然后,将每个方块的boundary输出到控制台。
执行以上代码,将得到类似如下的结果:
```
方块 [0,0] 的boundary为 {{0 0} {200 200}}
方块 [0,1] 的boundary为 {{0 200} {200 400}}
方块 [0,2] 的boundary为 {{0 400} {200 600}}
方块 [0,3] 的boundary为 {{0 600} {200 800}}
方块 [0,4] 的boundary为 {{0 800} {200 1000}}
方块 [1,0] 的boundary为 {{200 0} {400 200}}
方块 [1,1] 的boundary为 {{200 200} {400 400}}
方块 [1,2] 的boundary为 {{200 400} {400 600}}
方块 [1,3] 的boundary为 {{200 600} {400 800}}
方块 [1,4] 的boundary为 {{200 800} {400 1000}}
方块 [2,0] 的boundary为 {{400 0} {600 200}}
方块 [2,1] 的boundary为 {{400 200} {600 400}}
方块 [2,2] 的boundary为 {{400 400} {600 600}}
方块 [2,3] 的boundary为 {{400 600} {600 800}}
方块 [2,4] 的boundary为 {{400 800} {600 1000}}
方块 [3,0] 的boundary为 {{600 0} {800 200}}
方块 [3,1] 的boundary为 {{600 200} {800 400}}
方块 [3,2] 的boundary为 {{600 400} {800 600}}
方块 [3,3] 的boundary为 {{600 600} {800 800}}
方块 [3,4] 的boundary为 {{600 800} {800 1000}}
方块 [4,0] 的boundary为 {{800 0} {1000 200}}
方块 [4,1] 的boundary为 {{800 200} {1000 400}}
方块 [4,2] 的boundary为 {{800 400} {1000 600}}
方块 [4,3] 的boundary为 {{800 600} {1000 800}}
方块 [4,4] 的boundary为 {{800 800} {1000 1000}}
```
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)