19264液晶屏显示温度的代码
时间: 2023-05-28 11:05:34 浏览: 100
抱歉,无法提供完整的代码,因为缺少具体的硬件和库文件信息。以下是一个简单的示例代码,可以帮助您开始液晶屏显示温度的项目:
```
#include <LiquidCrystal.h> // 引入液晶屏库
LiquidCrystal lcd(12, 11, 5, 4, 3, 2); // 初始化液晶屏
int tempPin = A0; // 温度传感器的引脚
float temp; // 存储温度值
void setup() {
lcd.begin(16, 2); // 初始化液晶屏行数和列数
lcd.setCursor(0, 0); // 设置光标位置
lcd.print("Temperature:"); // 在第一行显示文本
}
void loop() {
int reading = analogRead(tempPin); // 读取温度传感器值
temp = reading * 0.48828125; // 将传感器值转换为温度值
lcd.setCursor(0, 1); // 设置光标位置
lcd.print(temp); // 在第二行显示温度值
lcd.print("C"); // 在温度值后面加上单位
delay(1000); // 等待1秒钟再更新温度值
}
```
请注意,此代码仅是示例,并可能需要根据您的具体硬件和库文件进行修改和调整。
相关问题
接着把温度在19264液晶屏显示的代码
这里提供一个基于Arduino的例程,用于将温度值在19264液晶屏上显示。
```
#include <U8glib.h> //U8glib库
U8GLIB_ST7920_128X64_1X u8g(13, 11, 10, 9, 8); //初始化U8glib库
void setup() {
u8g.setFont(u8g_font_unifont); //设置字体
}
void loop() {
int temp = analogRead(A0); //读取模拟输入A0的值
float voltage = temp * 5.0 / 1024; //将读取的值转换为电压值
float temperature = (voltage - 0.5) * 100; //根据温度传感器的特性将电压值转换为温度值
u8g.firstPage(); //开始绘制页面
do {
u8g.drawStr(0, 20, "Temperature:"); //显示“Temperature:”字符串
u8g.setPrintPos(0, 40); //设置打印位置
u8g.print(temperature); //显示温度值
u8g.print(" C"); //显示“C”单位
} while (u8g.nextPage()); //继续绘制下一页
delay(1000); //延迟1秒钟
}
```
说明:
- 我们使用了U8glib库来控制19264液晶屏的显示。
- 在setup()函数中,我们设置了字体。
- 在loop()函数中,我们首先读取模拟输入A0的值,并将其转换为温度值。
- 然后,我们使用U8glib库来显示温度值。我们在第一页上显示“Temperature:”字符串,并在第二页上显示温度值和单位“C”。
- 最后,我们使用延迟函数来等待1秒钟,然后再次读取温度值并更新屏幕上的显示。
液晶屏19264显示显示采集温度的程序
以下是一份可以在液晶屏19264上显示采集温度的程序代码示例:
```
#include <Wire.h> // I2C library
#include <LiquidCrystal_I2C.h> // LiquidCrystal library
LiquidCrystal_I2C lcd(0x27,16,2); // initialize the LCD
void setup()
{
lcd.init(); // initialize the LCD
lcd.backlight(); // turn on the backlight
lcd.clear(); // clear the screen
Serial.begin(9600); // initialize Serial communication
Wire.begin(); // initialize I2C communication
}
void loop()
{
Wire.requestFrom(0x48,2); // request data from temperature sensor
byte msb = Wire.read(); // read the most significant byte
byte lsb = Wire.read(); // read the least significant byte
int temp = (msb << 8) | lsb; // combine the two bytes
temp = temp >> 4; // shift right 4 bits to get actual temperature
float celsius = temp * 0.0625; // convert raw temperature to Celsius
lcd.setCursor(0,0); // set cursor to first column of first row
lcd.print("Temp: "); // print the word "Temp: "
lcd.print(celsius,2); // print the temperature with 2 decimal places
lcd.print(" C"); // print "C" for Celsius
delay(5000); // wait 5 seconds before updating the screen
}
```
这个程序会通过I2C读取一个温度传感器的数据,并显示当前温度值到液晶屏19264上。
请注意,具体的传感器型号和I2C地址可能会因为硬件不同而有所不同,需要根据实际情况进行调整。