交换机配置irf命令完整配置

IRF（Intelligent Resilient Framework）是惠普企业级交换机的高可用性技术之一，它可以将多个物理交换机组成一个逻辑交换机，提供更高的可靠性和性能。

以下是一个 HP 交换机 IRF 的完整配置示例（假设交换机型号为 HP 5900）：

1. 配置 IRF 基础信息

<Switch1> system-view
[Switch1] irf domain 1
[Switch1] undo irf auto-update enable
[Switch1] irf member 1 priority 32
[Switch1] irf member 2 priority 64

2. 配置 IRF 端口

[Switch1] interface Ten-GigabitEthernet1/0/1
[Switch1-Ten-GigabitEthernet1/0/1] irf port 1
[Switch1-Ten-GigabitEthernet1/0/1] quit
[Switch1] interface Ten-GigabitEthernet1/0/2
[Switch1-Ten-GigabitEthernet1/0/2] irf port 2
[Switch1-Ten-GigabitEthernet1/0/2] quit

3. 启用 IRF

[Switch1] irf-port-configuration active
[Switch1] quit

4. 配置 IRF 管理口

[Switch1] interface Bridge-Aggregation1
[Switch1-Bridge-Aggregation1] port link-type trunk
[Switch1-Bridge-Aggregation1] port trunk permit vlan 1 to 4094
[Switch1-Bridge-Aggregation1] irf-port 1
[Switch1-Bridge-Aggregation1] quit

5. 检查 IRF 配置

[Switch1] display irf configuration
[Switch1] display irf state

注意：以上命令仅供参考，实际操作时需要根据具体情况进行调整。