写stm32控制电磁锁的代码
时间: 2023-10-03 17:03:58 浏览: 207
下面是一个简单的例子,演示如何使用STM32控制电磁锁的开关状态。假设我们使用的是STM32F103C8T6开发板,电磁锁的控制引脚接在PB12上。
```c
#include "stm32f10x.h"
int main(void)
{
// 初始化GPIOB
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
// 控制电磁锁
while(1) {
GPIO_SetBits(GPIOB, GPIO_Pin_12); // 电磁锁闭合
Delay(5000); // 延时一段时间
GPIO_ResetBits(GPIOB, GPIO_Pin_12); // 电磁锁打开
Delay(5000); // 延时一段时间
}
}
// 延时函数
void Delay(__IO uint32_t nCount)
{
for(; nCount != 0; nCount--);
}
```
在这个例子中,我们使用了GPIOB的第12个引脚控制电磁锁的开关状态。使用`GPIO_Init()`函数进行GPIOB的初始化,并在`while`循环中控制电磁锁的开关状态。`Delay()`函数用于延时一段时间,以便观察电磁锁的开关状态。
需要注意的是,这只是一个简单的例子,实际的电路和代码需要根据具体的需求进行调整和优化。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![xlsx](https://img-home.csdnimg.cn/images/20210720083732.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)