源程序怎么写
时间: 2023-07-03 10:15:51 浏览: 32
可以参考以下示例代码:
```python
import math
repeat = int(input("请输入 repeat 值:"))
for i in range(repeat):
n = int(input("请输入 n 值:"))
x = float(input("请输入 x 值:"))
result = 0
for j in range(n + 1):
result += math.pow(-1, j) * math.pow(x, 2 * j + 1) / math.factorial(2 * j + 1)
print("p(n,x) 的值为:{:.2f}".format(result))
```
其中,我们使用 `math` 模块中的 `pow()`、`factorial()` 函数分别计算幂次方和阶乘,以求解函数 `p(n,x)` 的值。使用 `format()` 函数将结果格式化为保留两位小数的浮点数输出。
相关问题
FM17550串行uart通信stm32源程序读写操作
您可以使用STM32的串行UART通信模块来实现与FM17550之间的通信。以下是一个示例程序,演示了如何使用STM32的UART模块进行读写操作。
```c
#include "stm32f4xx.h"
// 初始化UART
void UART_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
USART_InitTypeDef USART_InitStruct;
// 使能UART和GPIO时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOB, ENABLE);
// 配置UART引脚
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOB, &GPIO_InitStruct);
// 将GPIO引脚与UART功能映射
GPIO_PinAFConfig(GPIOB, GPIO_PinSource6, GPIO_AF_USART1);
GPIO_PinAFConfig(GPIOB, GPIO_PinSource7, GPIO_AF_USART1);
// 配置UART参数
USART_InitStruct.USART_BaudRate = 115200;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStruct);
// 使能UART
USART_Cmd(USART1, ENABLE);
}
// 发送数据
void UART_SendData(uint8_t data)
{
while(USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET); // 等待发送缓冲区为空
USART_SendData(USART1, data);
}
// 接收数据
uint8_t UART_ReceiveData(void)
{
while(USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == RESET); // 等待接收缓冲区非空
return USART_ReceiveData(USART1);
}
int main(void)
{
uint8_t txData[] = {0x01, 0x02, 0x03}; // 要发送的数据
uint8_t rxData[3]; // 接收的数据
UART_Init(); // 初始化UART
// 发送数据
for (int i = 0; i < 3; i++)
{
UART_SendData(txData[i]);
}
// 接收数据
for (int i = 0; i < 3; i++)
{
rxData[i] = UART_ReceiveData();
}
while (1)
{
// 程序主循环
}
}
```
这是一个简单的示例程序,通过UART与FM17550进行通信。您可以根据您的具体需求进行修改和扩展。请确保正确配置UART的引脚、波特率和数据格式等参数,以适配您的硬件环境和通信协议要求。
请注意,此示例程序基于STM32F4系列微控制器,使用了标准外设库(StdPeriph Library)。如果您使用其他系列的STM32微控制器或者使用了不同的库,请根据实际情况进行相应的修改和适配。
编辑器用流把编写的的Java语言源程序写到文件中,用( )的子类。
用 FileOutputStream 的子类可以将编写的 Java 语言源程序写到文件中。例如,可以使用 BufferedOutputStream,它提供了缓冲机制,可以提高写入文件的效率。代码示例:
```
try {
FileOutputStream fos = new FileOutputStream("output.txt");
BufferedOutputStream bos = new BufferedOutputStream(fos);
String str = "Hello, world!";
byte[] bytes = str.getBytes();
bos.write(bytes);
bos.close();
} catch (IOException e) {
e.printStackTrace();
}
```
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)