请用英语把下段话修改的更加合理:When the radiation ratio is high, the conversion rate of controlled methane will decrease, which will increase the inlet flow under the control of the reactor, so as to increase the heat consumption and reduce the reactor temperature and improve the hydrogen yield. When the radiation ratio is low and the heat supply is insufficient, the inlet flow rate can be reduced by increasing the controlled methane conversion rate, thus reducing the heat release rate of the reactor and keeping the reactor stable for a long time at a low yield.

时间: 2023-03-14 10:58:11 浏览: 169
When the radiation ratio is high, the conversion rate of controlled methane will decrease, resulting in an increase in the inlet flow rate under the control of the reactor. This increased heat consumption will reduce the reactor temperature and decrease the hydrogen yield. Conversely, when the radiation ratio is low and the heat supply is insufficient, the inlet flow rate can be reduced by increasing the controlled methane conversion rate, which will reduce the heat release rate of the reactor, allowing it to remain stable at a low yield for an extended period of time.
相关问题

请用英语将下面一段话描述的更加科学严谨:In this work, an adaptive P and PI control strategy is proposed for a solar-driven volumetric methane/steam reforming reactor (SVMSR) with passive thermal management, aiming at stabilizing both the output product components and hydrogen production rate under fluctuating solar radiation conditions. The idea of adaptive control is applied and the adaptation law is established to get the appropriate set-points of controllers by exploring the relationship between solar fluctuating characteristics and appropriate control target. P and PI controllers are coupled with a 2D multi-physical reactor model to achieve the control target. Finally, the adaptation law and P and PI control strategy are tested under actual fluctuating solar radiation. The results show that double controllers under the adaptation law can increase the average hydrogen yield and significantly reduce the fluctuation of hydrogen production rate while maintaining the stability of output product components under fluctuating radiation condition.

在这项研究中,针对具有被动热管理的太阳能驱动体积甲烷/蒸汽改性反应器(SVMSR),提出了一种自适应P和PI控制策略,旨在在太阳辐射条件变化的情况下稳定产品成分和氢产量。采用自适应控制的思想,通过探索太阳波动特征和适当控制目标之间的关系,建立了适应规律,以获得控制器的适当设置点。P和PI控制器与2D多物理反应器模型相结合,以实现控制目标。最后,在实际波动的太阳辐射下测试适应规律和P和PI控制策略。结果表明,在适应规律下的双控制器可以提高平均氢产量,并在保持产品成分的稳定的同时显着减少氢产量的波动。

请用科学严谨的语言润色下面这段话:In this work, an adaptive P and PI control strategy is proposed for a solar-driven volumetric methane/steam reforming reactor (SVMSR) with passive thermal management, aiming at stabilizing both the output product components and hydrogen production rate under fluctuating solar radiation conditions. The idea of adaptive control is applied and the adaptation law is established to get the appropriate set-points of controllers by exploring the relationship between solar fluctuating characteristics and appropriate control target. P and PI controllers are coupled with a 2D multi-physical reactor model to achieve the control target. Finally, the adaptation law and P and PI control strategy are tested under actual fluctuating solar radiation. The results show that double controllers under the adaptation law can increase the average hydrogen yield and significantly reduce the fluctuation of hydrogen production rate while maintaining the stability of output product components under fluctuating radiation condition.

研究中,针对具有被动热管理特性的太阳能驱动的沼气/蒸汽改性反应器(SVMSR)提出了一种自适应P和PI控制策略,旨在在不断变化的太阳辐射条件下稳定产品组分和氢气产量。应用了自适应控制的思想,通过探索太阳变化特征与适当的控制目标之间的关系,建立了自适应法则,以获得适当的控制器设定点。P和PI控制器与2D多物理反应器模型相结合,以实现控制目标。最后,在实际变化的太阳辐射下测试了自适应法则和P和PI控制策略。结果表明,在变化的辐射条件下,双控制器在自适应法则的指导下可以提高平均氢气产量,同时在维持产品组分的稳定性的同时显著减少氢气产量的波动。
阅读全文

相关推荐

% SolarCollector.m % ---------------------------------------------------------------------------------------------------------------------- % % Simple first-order solar collector model (M-file called by TRNSYS type 155) % % Data passed from / to TRNSYS % ---------------------------- % % trnTime (1x1) : simulation time % trnInfo (15x1) : TRNSYS info array % trnInputs (nIx1) : TRNSYS inputs % trnStartTime (1x1) : TRNSYS Simulation Start time % trnStopTime (1x1) : TRNSYS Simulation Stop time % trnTimeStep (1x1) : TRNSYS Simulation time step % mFileErrorCode (1x1) : Error code for this m-file. It is set to 1 by TRNSYS and the m-file should set it to 0 at the % end to indicate that the call was successful. Any non-zero value will stop the simulation % trnOutputs (nOx1) : TRNSYS outputs % % % Notes: % ------ % % You can use the values of trnInfo(7), trnInfo(8) and trnInfo(13) to identify the call (e.g. first iteration, etc.) % Real-time controllers (callingMode = 10) will only be called once per time step with trnInfo(13) = 1 (after convergence) % % The number of inputs is given by trnInfo(3) % The number of expected outputs is given by trnInfo(6) % WARNING: if multiple units of Type 155 are used, the variables passed from/to TRNSYS will be sized according to % the maximum required by all units. You should cope with that by only using the part of the arrays that is % really used by the current m-File. Example: use "nI = trnInfo(3); myInputs = trnInputs(1:nI);" % rather than "MyInputs = trnInputs;" % Please also note that all m-files share the same workspace in Matlab (they are "scripts", not "functions") so % variables like trnInfo, trnTime, etc. will be overwritten at each call. % % ---------------------------------------------------------------------------------------------------------------------- % This example implements a very simple solar collector model. The component is iterative (should be called at each % TRNSYS call) % % trnInputs % --------- % % trnInputs(1) : Ti, collector inlet temperature % trnInputs(2) : mdot, collector flowrate % trnInputs(3) : Tamb , ambient temperature % trnInputs(4) : Gt, solar radiation in the collector plane % % trnOutputs解释下这段代码

帮我把下面这段英文从用词、语法、结构上修改一下。Rab GTPases serve as master regulators of membrane trafficking. They can be activated by guanine nucleotide exchange factors (GEF) and be inactivated by GTPase-activating proteins (GAPs). The roles of some GAPs have been explored in Saccharomyces cerevisiae, but are largely unknown in filamentous fungi. Here, we investigated the role of GAP Gyp3 gene, an ortholog of S. cerevisiae Gyp3, in an entomopathogenic fungus, Metarhizium acridum. We found that MaGyp3 is mainly localized to the endoplasmic reticulum (ER) of vegetative hyphae, nuclei of mature conidia, and both ER and nuclei in invasive hyphae. Lack of MaGyp3 caused a decreased tolerance to hyperosmotic stress, heat-shock and UV-B radiation. Moreover, the ΔMaGyp3 mutant showed a significantly decreased pathogenicity owing to delayed germination, reduced appressorium-mediated penetration and impaired invasive growth. Loss of MaGyp3 also caused impaired fungal growth, advanced conidiation and defects in utilization of carbon and nitrogen sources, while overexpression of MaGyp3 exhibited delayed conidiation on nutrient-rich medium and conidiation pattern shift from microcycle conidiation to normal conidiation on nutrient-limited medium. Mavib-1, a tanscription factor invloved in conidiation by affecting nutrient utilizaiton, can directly bind to the promoter of MaGyp3. ΔMaGyp3 and ΔMavib-1 mutants shared similar phenotypes, and overexpression mutants of MaGyp3 and Mavib-1 (Mavib-1-OE) exhibited similar phenotypes in growth, conidiation and pathogenicity. Reintroduction of the Magyp3 driven by strong promoter gpd in ΔMavib-1 mutant recovered the defects in growth and conidiation for dysfunction of Mavib1. Taken together, our findings uncovered the role of GAP3 in a filamentous pathogenic fungus and and illustrated the upstream regulatory mechanism by direct interaction with Mavib-1.

Heatwaves impose serious impacts on ecosystems, human health, agriculture, and energy consumption. Previous studies have classified heatwaves into independent daytime, independent nighttime, and compound daytime-nighttime types, and examined the long-term changes in the three types. However, the underlying mechanisms associated with the variations in different heatwave types remain poorly understood. Here we present the first investigation of the local physical processes associated with the daytime, nighttime, and compound heatwaves over the global land during 1979–2020. The results show that three heatwave types occur frequently and increasingly in most regions worldwide. Nighttime and compound heatwaves exhibit stronger increases in both frequency (the yearly number of the events) and fraction (the ratio of the yearly number of one heatwave type to the total yearly number of all types) than daytime heatwaves. Composite diagnostic analyses of local meteorological variables suggest that daytime heatwaves are associated with increased solar radiation under dry conditions and reduced cloud cover and humidity under a clear sky. In contrast, nighttime heatwaves are typically accompanied by moist conditions with increases in cloud fraction, humidity, and longwave radiation at night. These synoptic conditions for daytime and nighttime heatwaves are combined to contribute to compound heatwaves. Local divergences and moisture fluxes responsible for different heatwaves are further revealed. Positive moisture divergence anomalies are seen in most land areas for daytime and compound heatwaves, while they mainly appear in low latitudes for nighttime heatwaves. Our research provides a comprehensive understanding of the local mechanisms of different heatwave types, informing future risks and impact assessments.分析语言特征

最新推荐

recommend-type

基于PLC的S7-200组态王智能小区路灯节能控制系统详解:梯形图程序、接线图与组态画面全解析,基于PLC的S7-200组态王智能小区路灯节能控制系统详解:梯形图程序、接线图与组态画面全解析,S7-2

基于PLC的S7-200组态王智能小区路灯节能控制系统详解:梯形图程序、接线图与组态画面全解析,基于PLC的S7-200组态王智能小区路灯节能控制系统详解:梯形图程序、接线图与组态画面全解析,S7-200 组态王 基于PLC的智能小区路灯节能控制系统 带解释的梯形图程序,接线图原理图图纸,io分配,组态画面 ,S7-200; 组态王; PLC; 智能小区; 路灯节能控制; 梯形图程序; 接线图原理图; IO分配; 组态画面,基于S7-200 PLC的智能小区路灯节能控制系统:梯形图程序与组态画面详解
recommend-type

java代码的相关练习,包括刷题和代码仿写.zip

javajava代码的相关练习,包括刷题和代码仿写.zip
recommend-type

世界地图Shapefile文件解析与测试指南

标题中提到的“世界地图的shapefile文件”,涉及到两个关键概念:世界地图和shapefile文件格式。首先我们来解释这两个概念。 世界地图是一个地理信息系统(GIS)中常见的数据类型,通常包含了世界上所有或大部分国家、地区、自然地理要素的图形表达。世界地图可以以多种格式存在,比如栅格数据格式(如JPEG、PNG图片)和矢量数据格式(如shapefile、GeoJSON、KML等)。 shapefile文件是一种流行的矢量数据格式,由ESRI(美国环境系统研究所)开发。它主要用于地理信息系统(GIS)软件,用于存储地理空间数据及其属性信息。shapefile文件实际上是一个由多个文件组成的文件集,这些文件包括.shp、.shx、.dbf等文件扩展名,分别存储了图形数据、索引、属性数据等。这种格式广泛应用于地图制作、数据管理、空间分析以及地理研究。 描述提到,这个shapefile文件适合应用于解析shapefile程序的测试。这意味着该文件可以被用于测试或学习如何在程序中解析shapefile格式的数据。对于GIS开发人员或学习者来说,能够处理和解析shapefile文件是一项基本而重要的技能。它需要对文件格式有深入了解,以及如何在各种编程语言中读取和写入这些文件。 标签“世界地图 shapefile”为这个文件提供了两个关键词。世界地图指明了这个shapefile文件内容的地理范围,而shapefile指明了文件的数据格式。标签的作用通常是用于搜索引擎优化,帮助人们快速找到相关的内容或文件。 在压缩包子文件的文件名称列表中,我们看到“wold map”这个名称。这应该是“world map”的误拼。这提醒我们在处理文件时,确保文件名称的准确性和规范性,以避免造成混淆或搜索不便。 综合以上信息,知识点的详细介绍如下: 1. 世界地图的概念:世界地图是地理信息系统中一个用于表现全球或大范围区域地理信息的图形表现形式。它可以显示国界、城市、地形、水体等要素,并且可以包含多种比例尺。 2. shapefile文件格式:shapefile是一种矢量数据格式,非常适合用于存储和传输地理空间数据。它包含了多个相关联的文件,以.shp、.shx、.dbf等文件扩展名存储不同的数据内容。每种文件类型都扮演着关键角色: - .shp文件:存储图形数据,如点、线、多边形等地理要素的几何形状。 - .shx文件:存储图形数据的索引,便于程序快速定位数据。 - .dbf文件:存储属性数据,即与地理要素相关联的非图形数据,例如国名、人口等信息。 3. shapefile文件的应用:shapefile文件在GIS应用中非常普遍,可以用于地图制作、数据编辑、空间分析、地理数据的共享和交流等。由于其广泛的兼容性,shapefile格式被许多GIS软件所支持。 4. shapefile文件的处理:GIS开发人员通常需要在应用程序中处理shapefile数据。这包括读取shapefile数据、解析其内容,并将其用于地图渲染、空间查询、数据分析等。处理shapefile文件时,需要考虑文件格式的结构和编码方式,正确解析.shp、.shx和.dbf文件。 5. shapefile文件的测试:shapefile文件在开发GIS相关程序时,常被用作测试材料。开发者可以使用已知的shapefile文件,来验证程序对地理空间数据的解析和处理是否准确无误。测试过程可能包括读取测试、写入测试、空间分析测试等。 6. 文件命名的准确性:文件名称应该准确无误,以避免在文件存储、传输或检索过程中出现混淆。对于地理数据文件来说,正确的命名还对确保数据的准确性和可检索性至关重要。 以上知识点涵盖了世界地图shapefile文件的基础概念、技术细节、应用方式及处理和测试等重要方面,为理解和应用shapefile文件提供了全面的指导。
recommend-type

Python环境监控高可用构建:可靠性增强的策略

# 1. Python环境监控高可用构建概述 在构建Python环境监控系统时,确保系统的高可用性是至关重要的。监控系统不仅要在系统正常运行时提供实时的性能指标,而且在出现故障或性能瓶颈时,能够迅速响应并采取措施,避免业务中断。高可用监控系统的设计需要综合考虑监控范围、系统架构、工具选型等多个方面,以达到对资源消耗最小化、数据准确性和响应速度最优化的目
recommend-type

需要在matlab当中批量导入表格数据的指令

### 如何在 MATLAB 中批量导入表格数据 为了高效地处理多个表格文件,在 MATLAB 中可以利用脚本自动化这一过程。通过编写循环结构读取指定目录下的所有目标文件并将其内容存储在一个统一的数据结构中,能够显著提升效率。 对于 Excel 文件而言,`readtable` 函数支持直接从 .xls 或者 .xlsx 文件创建 table 类型变量[^2]。当面对大量相似格式的 Excel 表格时,可以通过遍历文件夹内的每一个文件来完成批量化操作: ```matlab % 定义要扫描的工作路径以及输出保存位置 inputPath = 'C:\path\to\your\excelFil
recommend-type

Sqlcipher 3.4.0版本发布,优化SQLite兼容性

从给定的文件信息中,我们可以提取到以下知识点: 【标题】: "sqlcipher-3.4.0" 知识点: 1. SQLCipher是一个开源的数据库加密扩展,它为SQLite数据库增加了透明的256位AES加密功能,使用SQLCipher加密的数据库可以在不需要改变原有SQL语句和应用程序逻辑的前提下,为存储在磁盘上的数据提供加密保护。 2. SQLCipher版本3.4.0表示这是一个特定的版本号。软件版本号通常由主版本号、次版本号和修订号组成,可能还包括额外的前缀或后缀来标识特定版本的状态(如alpha、beta或RC - Release Candidate)。在这个案例中,3.4.0仅仅是一个版本号,没有额外的信息标识版本状态。 3. 版本号通常随着软件的更新迭代而递增,不同的版本之间可能包含新的特性、改进、修复或性能提升,也可能是对已知漏洞的修复。了解具体的版本号有助于用户获取相应版本的特定功能或修复。 【描述】: "sqlcipher.h是sqlite3.h的修正,避免与系统预安装sqlite冲突" 知识点: 1. sqlcipher.h是SQLCipher项目中定义特定加密功能和配置的头文件。它基于SQLite的头文件sqlite3.h进行了定制,以便在SQLCipher中提供数据库加密功能。 2. 通过“修正”原生SQLite的头文件,SQLCipher允许用户在相同的编程环境或系统中同时使用SQLite和SQLCipher,而不会引起冲突。这是因为两者共享大量的代码基础,但SQLCipher扩展了SQLite的功能,加入了加密支持。 3. 系统预安装的SQLite可能与需要特定SQLCipher加密功能的应用程序存在库文件或API接口上的冲突。通过使用修正后的sqlcipher.h文件,开发者可以在不改动现有SQLite数据库架构的基础上,将应用程序升级或迁移到使用SQLCipher。 4. 在使用SQLCipher时,开发者需要明确区分它们的头文件和库文件,避免链接到错误的库版本,这可能会导致运行时错误或安全问题。 【标签】: "sqlcipher" 知识点: 1. 标签“sqlcipher”直接指明了这个文件与SQLCipher项目有关,说明了文件内容属于SQLCipher的范畴。 2. 一个标签可以用于过滤、分类或搜索相关的文件、代码库或资源。在这个上下文中,标签可能用于帮助快速定位或检索与SQLCipher相关的文件或库。 【压缩包子文件的文件名称列表】: sqlcipher-3.4.0 知识点: 1. 由于给出的文件名称列表只有一个条目 "sqlcipher-3.4.0",它很可能指的是压缩包文件名。这表明用户可能下载了一个压缩文件,解压后的内容应该与SQLCipher 3.4.0版本相关。 2. 压缩文件通常用于减少文件大小或方便文件传输,尤其是在网络带宽有限或需要打包多个文件时。SQLCipher的压缩包可能包含头文件、库文件、示例代码、文档、构建脚本等。 3. 当用户需要安装或更新SQLCipher到特定版本时,他们通常会下载对应的压缩包文件,并解压到指定目录,然后根据提供的安装指南或文档进行编译和安装。 4. 文件名中的版本号有助于确认下载的SQLCipher版本,确保下载的压缩包包含了期望的特性和功能。 通过上述详细解析,我们可以了解到关于SQLCipher项目版本3.4.0的相关知识,以及如何处理和使用与之相关的文件。
recommend-type

Python环境监控性能监控与调优:专家级技巧全集

# 1. Python环境性能监控概述 在当今这个数据驱动的时代,随着应用程序变得越来越复杂和高性能化,对系统性能的监控和优化变得至关重要。Python作为一种广泛应用的编程语言,其环境性能监控不仅能够帮助我们了解程序运行状态,还能及时发现潜在的性能瓶颈,预防系统故障。本章将概述Python环境性能监控的重要性,提供一个整体框架,以及为后续章节中深入探讨各个监控技术打
recommend-type

simulinlk怎么插入线

### 如何在 Simulink 中添加或插入连接线 在 Simulink 中创建模型时,连接线用于表示信号从一个模块传递到另一个模块。以下是几种常见的方法来添加或插入连接线: #### 使用鼠标拖拽法 通过简单的鼠标操作可以快速建立两个模块之间的连接。当光标悬停在一个模块的输入端口或输出端口上时,会出现一个小圆圈提示可连接区域;此时按住左键并拖动至目标位置即可完成连线[^1]。 #### 利用手绘模式绘制直线段 对于更复杂的路径需求,则可以通过手绘方式精确控制每一段线路走向。例如,在 MATLAB 命令窗口中执行如下代码片段能够实现特定坐标的短折线绘制: ```matlab annot
recommend-type

Java项目中standard.jar压缩包的处理与使用

标题中提到的“standard.jar.zip”表明我们正在讨论一个压缩过的Java归档文件,即ZIP格式的压缩包,它包含了名为“standard.jar”的Java归档文件。在Java开发环境中,JAR(Java归档)文件是一种打包多个文件到一个压缩文件的方法,通常用于分发和部署Java类文件、元数据和资源文件(如文本、图片等)。 描述中的代码片段使用了JSP(JavaServer Pages)标签库定义的方式,引入了JSTL(JavaServer Pages Standard Tag Library)的核心标签库。JSTL是一个用于JSP的标签库,它提供了实现Web应用逻辑的自定义标签,而不再需要在JSP页面中编写Java代码。这段代码使用了JSTL标签库的前缀声明:“<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>”,这意味着在当前的JSP页面中,所有带有“c:”前缀的标签都将被视为JSTL核心库中的标签。 标签“java引入”可能是指向JSTL标签库的引入。这在JSP页面中是必要的,因为引入了JSTL标签库之后,才能在页面中使用JSTL标签进行循环、条件判断、国际化等操作,这些操作通常在JSP页面中用于替代Java脚本片段。 文件名称列表中只有一个“standard.jar”,这是在ZIP压缩包中实际包含的JAR文件。JAR文件在Java开发中经常被用作将多个Java类和资源打包成单个归档文件,从而简化部署和分发。JAR文件通常包含一个清单文件(manifest.mf),其中可以定义主类、版本信息、所需库等。清单文件位于META-INF目录下,而“standard.jar”中的内容可能包括编译后的.class文件、图片、文本文件等。 Java引入这一概念,除了字面意义上的JSTL标签库引入外,还可以泛指在Java项目中引入各种依赖库的操作。在开发Java项目时,开发者通常需要使用第三方库来扩展Java的功能,比如日志记录、数据库连接、网络通信等。这些库通常被打包成JAR文件,并可通过多种方式(如Maven、Gradle、直接添加JAR到项目路径)被引入项目中。 总结来说,本文涉及的关键知识点包括了Java开发中JAR文件的使用、ZIP压缩包的应用、JSP页面的标签库引入和JSTL标签库的基本介绍。这些知识点是构建和维护Java Web应用不可或缺的基础组成部分。理解这些知识点,对于进行有效的Java开发工作是十分必要的。
recommend-type

Python环境监控动态配置:随需应变的维护艺术

# 1. Python环境监控的必要性与挑战 ## 环境监控的重要性 Python环境监控对于IT运营和开发团队来说至关重要。有效的监控能够确保环境稳定运行,预防潜在的服务中断,并为性能优化提供数据支持。在Python项目中,监控可以跟踪代码执行效率,资源消耗,以及潜在的安全漏洞