我需要使用zigbee3.0协议编写发生开关命令到网关的代码

可以参考以下代码，这是一个使用zigbee3.0协议发送开关命令到网关的例子：// Send command to gateway
uint8_t command[2];
command[0] = 0x01; // Command type
command[1] = 0x02; // Command parameters// Create a Zigbee frame
Zigbee_Frame zigbee_frame;
zigbee_frame.frame_type = ZIGBEE_FRAME_TYPE_COMMAND;
zigbee_frame.frame_length = 2;
zigbee_frame.frame_data = (uint8_t *)command;// Send the Zigbee frame
zigbee_send_frame(&zigbee_frame);