利用led显示器,设计输出字符串1234.56的程序
时间: 2024-06-09 22:05:14 浏览: 13
这是一个基于Arduino平台的程序示例:
```c++
// 引入LED显示器库
#include <LedControl.h>
// 设置LED显示器的引脚
const int DIN_PIN = 12;
const int CS_PIN = 11;
const int CLK_PIN = 10;
// 创建一个LedControl对象,用于控制LED显示器
LedControl lc = LedControl(DIN_PIN, CLK_PIN, CS_PIN, 1);
// 定义一个函数,用于将数字字符转换为对应的数字(0~9)
int charToDigit(char c) {
switch(c) {
case '0': return 0;
case '1': return 1;
case '2': return 2;
case '3': return 3;
case '4': return 4;
case '5': return 5;
case '6': return 6;
case '7': return 7;
case '8': return 8;
case '9': return 9;
default: return -1;
}
}
void setup() {
// 初始化LED显示器
lc.shutdown(0, false);
lc.setIntensity(0, 8);
lc.clearDisplay(0);
}
void loop() {
// 定义要显示的字符串
String str = "1234.56";
// 遍历字符串中的每一个字符
for(int i = 0; i < str.length(); i++) {
char c = str.charAt(i);
// 判断当前字符是否为小数点
if(c == '.') {
// 在LED显示器上显示小数点
lc.setChar(0, 4, i, false);
} else {
// 将字符转换为对应的数字
int digit = charToDigit(c);
// 在LED显示器上显示数字
lc.setDigit(0, i, digit, false);
}
}
// 等待一段时间后清除显示器
delay(5000);
lc.clearDisplay(0);
}
```
该程序使用了LedControl库来控制LED显示器。在setup函数中初始化了LED显示器,然后在loop函数中通过遍历字符串中的每一个字符来显示数字和小数点。最后,在等待一段时间后清除了显示器。