我需要一份stm32f103系列低电平触发的蜂鸣器的代码
时间: 2023-09-20 20:03:12 浏览: 111
当然,我可以帮助你编写一个低电平触的蜂鸣器代码。是一个基本的例代码:
```c
"stm32f10.h"
#define BEEP_PIN GPIO_Pin_
#define BEEP_GPIO GPIOB
void BEEP_Init(void)
{
GPIO_Init GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitStructure.GPIO_Pin = B_PIN;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out;
GPIO_Init(BEEP_GPIO, &GPIO_InitStructure);
}
void BEEP_On(void)
{
GPIO_SetBits(BEEP_GPIO, BEEP_PIN);
}
void BEEP_Off(void)
{
GPIO_ResetBits(BEEP_GPIO, BEEP_PIN);
}
int main(void)
{
BEEP_Init();
while (1)
{
// 低电平触发蜂鸣器
BEEP_On();
Delay(1000); // 延时1秒
BEEP_Off();
Delay(1000); // 延时1秒
}
}
```
请注意,这只是一个简单的示例代码。你需要根据自己的硬件连接和需求进行适当的修改和调整。另外,上述代码使用了一个名为 `Delay` 的函数来实现延时,你需要根据你所使用的开发环境进行相应的延时函数实现。
希望对你有所帮助!
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)