stm32串口通信配置
时间: 2023-10-07 18:06:19 浏览: 33
在 STM32 上使用串口通信,需要进行以下配置:
1. 启用 USART 外设:在 RCC 中使能 USART 外设时钟。
2. 配置 GPIO:将 USART 的 TX 和 RX 引脚配置为复用模式,并设置相应的引脚复用功能。
3. 配置 USART:设置波特率、数据位、停止位、校验位等参数。
4. 使能 USART:在 USART 控制寄存器中设置 UE 位,使能 USART 外设。
5. 发送和接收数据:使用 USART 的发送和接收寄存器进行数据的发送和接收。
下面是一个简单的示例代码,用于配置 USART1 进行串口通信:
```c
#include "stm32f4xx.h"
void USART_Config(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
USART_InitTypeDef USART_InitStruct;
// 使能 GPIO 和 USART 外设时钟
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
// 配置 TX 和 RX 引脚
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9 | GPIO_Pin_10;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOA, &GPIO_InitStruct);
// 配置 USART
USART_InitStruct.USART_BaudRate = 9600;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStruct);
// 使能 USART
USART_Cmd(USART1, ENABLE);
}
int main(void)
{
USART_Config();
while (1)
{
// 发送数据
USART_SendData(USART1, 'A');
// 等待接收数据
while (USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == RESET);
char data = USART_ReceiveData(USART1);
}
}
```
在上面的代码中,我们使用了 USART1 进行串口通信。首先在 RCC 中使能了 GPIOA 和 USART1 的时钟,然后配置了 GPIOA 的引脚 9 和 10 为复用模式,并设置了相应的引脚复用功能。接着,配置了 USART1 的波特率、数据位、停止位、校验位等参数,并使能了 USART1 外设。最后,在主循环中,我们发送了一个字符 'A',然后等待接收数据,并将接收到的数据存储在字符变量 data 中。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)