LM386在multisim里面如何创建
时间: 2024-05-29 17:09:19 浏览: 24
LM386是一款音频功放集成电路,可以通过以下步骤在Multisim中创建:
1. 打开Multisim软件,进入“Components”选项卡。
2. 在搜索栏中输入“LM386”,并选择“LM386 Audio Amplifier”元件。
3. 将该元件拖动至Multisim的画布中。
4. 双击该元件,在弹出的对话框中可以设置元件的参数,如放大倍数等。
注意,在Multisim中添加元件前需要确定该元件是否已经被库包含。如果没有,需要手动导入元件库文件。
相关问题
multisim中创建lm386元件
要在Multisim中创建LM386元件,可以按照以下步骤进行操作:
1. 打开Multisim软件,选择“Components”菜单,点击“New Component”。
2. 在弹出的对话框中,输入元件的名称“LM386”,选择元件的类型为“Op-Amp”(运算放大器),并设置元件的引脚数为8。
3. 在“Symbol Editor”界面中,绘制LM386元件的符号。可以参考LM386的数据手册,将元件的引脚符号绘制在符号编辑器中。
4. 在“Layout Editor”界面中,设置LM386元件的封装。可以选择现有的封装,也可以自己绘制封装。
5. 在“Component Properties”界面中,设置LM386元件的参数。可以设置元件的电气参数、封装参数等。
6. 最后,保存LM386元件,并将其添加到Multisim的元件库中,以便在电路设计中使用。
以上就是在Multisim中创建LM386元件的步骤。希望对您有所帮助。
multisim lm386
The LM386 is a power amplifier designed for use in low voltage audio applications. It is commonly used in portable devices such as radios, intercoms, and walkie-talkies. In Multisim, the LM386 can be found in the Amplifiers library.
To use the LM386 in Multisim, follow these steps:
1. Open Multisim and create a new circuit.
2. Drag and drop the LM386 from the Amplifiers library onto the circuit.
3. Connect the power supply to pins 6 and 4 of the LM386.
4. Connect the input signal to pin 3 of the LM386.
5. Connect the output to a speaker or headphones.
6. Set the gain using the potentiometer connected to pin 1 of the LM386.
7. Run the simulation to test the circuit.
Note: The LM386 is a simple amplifier and requires additional components such as capacitors and resistors for proper operation. Consult the data sheet for the LM386 for specific circuit designs.