stp edged-port enable
时间: 2023-10-15 18:04:54 浏览: 65
"stp edged-port enable" is a command used to enable the Edge port feature on a switch port that is connected to an endpoint device, such as a PC or a server. The Edge port feature is used in Spanning Tree Protocol (STP) to speed up the convergence process when a switch port goes up or down. By enabling the Edge port feature, the switch port is configured as a port that does not participate in the STP process, and it is assumed that the endpoint device connected to that port does not generate any STP messages. This allows the switch to immediately forward traffic on the port without waiting for the STP convergence process to complete.
相关问题
华三交换机配置stp
华三交换机配置STP(Spanning Tree Protocol)的步骤如下:
1. 进入交换机的全局配置模式:
```
<Switch> system-view
```
2. 开启STP功能:
```
[Switch] stp enable
```
3. 配置STP优先级(可选):
```
[Switch] stp priority <priority>
```
其中,`<priority>`是一个范围为0-61440的整数,值越小表示优先级越高,默认值为32768。
4. 配置STP根桥(可选):
```
[Switch] stp root primary
```
或者
```
[Switch] stp root secondary
```
`primary`表示将当前交换机配置为STP根桥,`secondary`表示将当前交换机配置为备用根桥。
5. 配置端口的STP模式:
```
[Switch] interface <interface>
[Switch-<interface>] stp edged-port enable
```
其中,`<interface>`是需要配置的端口编号,`edged-port enable`表示将该端口配置为边缘端口,即不参与STP计算。
6. 保存配置:
```
[Switch] save
```
以上是华三交换机配置STP的基本步骤。
华为stp mode stp命令
华为交换机中,STP(Spanning Tree Protocol)是用于防止网络环路的协议。在华为交换机中,STP的工作模式可以通过以下命令进行配置:
1. 配置全局STP模式:
```
[~Switch] stp mode {stp|rstp|mstp}
```
其中,“stp”表示STP模式,“rstp”表示RSTP模式,“mstp”表示MSTP模式。
2. 配置接口STP模式:
```
[~Switch] interface interface-type interface-number
[~Switch-<interface-type><interface-number>] stp edged-port enable
```
其中,“interface-type”表示接口类型,“interface-number”表示接口编号,“edged-port”表示边缘端口,通过该命令可以将指定接口配置为边缘端口,此时该接口不会参与STP计算。
以上是华为交换机中STP模式相关的命令。