stm32f103c8t6的ADC1通道0是什么
时间: 2023-03-02 14:08:36 浏览: 102
STM32F103C8T6是一款由ST公司推出的32位微控制器,其中ADC1是其内置的模数转换器模块,用于模拟信号的数字化处理。
通道0是ADC1模块中的一个输入通道,其对应的引脚为PA0,可以用于测量0到3.3V之间的模拟电压信号。在使用ADC1模块进行模数转换时,可以通过选择通道0来读取来自该引脚的模拟信号。
相关问题
基于stm32f103c8t6 adc采集通道12
基于stm32f103c8t6的ADC(模数转换器)模块,可以用于采集通道12的模拟信号。首先,需要设置ADC模块的工作模式和通道选择。
首先,需要初始化ADC模块,并设置工作模式为单通道连续模式。通过配置ADC_CR1寄存器的SCAN位和扫描模式,可以选择是否启用多通道扫描模式。
然后,需要选择采集的通道。对于通道12的选择,需要设置相应的寄存器值。ADC1的通道选择寄存器(ADC_CHSELR)可以设置采集通道,我们需要把位12设置为1,表示选择通道12进行采集。
接下来,可以设置采集精度和采样周期。通过配置ADC_CR1和ADC_SMPTx寄存器,可以设置分辨率、采样速率和采样时间。
最后,需要启动ADC模块开始采样。通过设置ADC_CR2寄存器的ADON位,可以开启ADC模块。然后,通过设置ADSTART位,启动转换。
当ADC完成转换后,可以通过读取ADC_DR寄存器的值,获取采样结果。同时,可以通过设置EOC位,使ADC模块在每次转换完毕后自动清除EOC位。
使用以上步骤,我们可以基于stm32f103c8t6的ADC模块,进行通道12的采集任务。采集到的模拟信号可以用于各种应用,如测量、控制等。
stm32f103c8t6adc多通道采集
在STM32F103C8T6芯片中,ADC有16个通道,可以同时进行多通道采集。下面是一个多通道采集的示例代码:
```
#include "stm32f10x.h"
void ADC1_GPIO_Config(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2; //选择PA0、PA1、PA2作为ADC的输入引脚
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN; //模拟输入模式
GPIO_Init(GPIOA, &GPIO_InitStructure);
}
void ADC1_Mode_Config(void)
{
ADC_InitTypeDef ADC_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_InitStructure.ADC_ScanConvMode = ENABLE; //开启扫描模式
ADC_InitStructure.ADC_ContinuousConvMode = ENABLE; //开启连续转换模式
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfChannel = 3; //采集通道数为3
ADC_Init(ADC1, &ADC_InitStructure);
ADC_RegularChannelConfig(ADC1, ADC_Channel_0, 1, ADC_SampleTime_55Cycles5); //配置要采集的通道和采样时间
ADC_RegularChannelConfig(ADC1, ADC_Channel_1, 2, ADC_SampleTime_55Cycles5);
ADC_RegularChannelConfig(ADC1, ADC_Channel_2, 3, ADC_SampleTime_55Cycles5);
ADC_Cmd(ADC1, ENABLE);
ADC_ResetCalibration(ADC1);
while (ADC_GetResetCalibrationStatus(ADC1));
ADC_StartCalibration(ADC1);
while (ADC_GetCalibrationStatus(ADC1));
}
int main(void)
{
uint16_t ADC_Value[3];
ADC1_GPIO_Config();
ADC1_Mode_Config();
while (1)
{
ADC_SoftwareStartConvCmd(ADC1, ENABLE); //开始转换
while (!ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC)); //等待转换完成
ADC_Value[0] = ADC_GetConversionValue(ADC1); //获取采集值
ADC_Value[1] = ADC_GetConversionValue(ADC1);
ADC_Value[2] = ADC_GetConversionValue(ADC1);
}
}
```
上述代码中,PA0、PA1、PA2被配置为ADC的输入引脚,采集通道数为3。在主函数中,使用ADC_SoftwareStartConvCmd()函数启动转换,使用ADC_GetConversionValue()获取采集值。可以根据需要修改采样时间。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)