基于CC2530的zigbee温湿度检测代码

以下是一个基于CC2530的zigbee温湿度检测的参考代码，供您参考：

#include "hal_defs.h"
#include "hal_uart.h"
#include "hal_led.h"
#include "hal_timer.h"
#include "OSAL.h"
#include "ZComDef.h"
#include "AF.h"
#include "ZDApp.h"
#include "ZDObject.h"
#include "ZDProfile.h"
#include "ZDConfig.h"
#include "MT_UART.h"
#include "MT.h"
#include "MT_SYS.h"
#include "MT_APP.h"
#include "DebugTrace.h"
#include "OnBoard.h"
#include "dht11.h"

#define APP_PERIODIC_CLUSTERID   0x0001
#define APP_REPORT_INTERVAL     5000

#define APP_DEST_ADDR            0x5678
#define APP_ENDPOINT             10
#define APP_PROFID               0x0104
#define APP_DEVICEID             0x0001
#define APP_DEVICE_VERSION       0
#define APP_FLAGS                0

#define SYS_EVENT_MSG            0x8000

byte appTaskId;

void App_SendPeriodicMessage(void);
void App_HandleMessage(zclIncoming_t *msg);
void App_Init(void);
UINT16 App_ProcessEvent(uint8 task_id, UINT16 events);

const cId_t App_ClusterList[APP_MAX_CLUSTERS] = {
  APP_PERIODIC_CLUSTERID
};

const SimpleDescriptionFormat_t App_SimpleDesc = {
  APP_ENDPOINT,
  APP_PROFID,
  APP_DEVICEID,
  APP_DEVICE_VERSION,
  APP_FLAGS,
  APP_MAX_CLUSTERS,
  (cId_t *)App_ClusterList
};

const endPointDesc_t App_epDesc = {
  APP_ENDPOINT,
  &App_TaskID,
  (SimpleDescriptionFormat_t *)&App_SimpleDesc,
  (afNetworkLatencyReq_t)0
};

void main(void) {
  System_Init();
  App_Init();
  while (TRUE) {
    osal_run_system();
  }
}

void App_Init(void) {
  halUARTCfg_t uartConfig;
  uartConfig.configured = TRUE;
  uartConfig.baudRate = HAL_UART_BR_115200;
  uartConfig.flowControl = FALSE;
  uartConfig.flowControlThreshold = 64;
  uartConfig.rx.maxBufSize = 128;
  uartConfig.tx.maxBufSize = 128;
  uartConfig.idleTimeout = 6;
  uartConfig.intEnable = TRUE;
  uartConfig.callBackFunc = NULL;
  HalUARTInit();
  HalUARTOpen(HAL_UART_PORT_0, &uartConfig);
  App_TaskID = osal_nv_item_init(APP_NV_ITEM_ID, sizeof(app_nv_item), NULL);
  osal_set_event(App_TaskID, SYS_EVENT_MSG);
  MT_Init();
  MT_UartInit(HAL_UART_PORT_0);
  MT_RegisterTask(App_TaskID);
  ZDOInit();
  ZDApp_Init();
  afRegister(&App_epDesc);
  RegisterForZDOMsg(task_id);
  osal_start_timerEx(App_TaskID, SYS_EVENT_MSG, 500);
}

UINT16 App_ProcessEvent(uint8 task_id, UINT16 events) {
  if (events & SYS_EVENT_MSG) {
    App_SendPeriodicMessage();
    osal_start_timerEx(App_TaskID, SYS_EVENT_MSG, APP_REPORT_INTERVAL);
    return (events ^ SYS_EVENT_MSG);
  }
  return 0;
}

void App_SendPeriodicMessage(void) {
  uint8_t temperature, humidity;
  uint8_t tx_data[2];
  temperature = DHT11_Read_Temperature();
  humidity = DHT11_Read_Humidity();
  tx_data[0] = temperature;
  tx_data[1] = humidity;
  afAddrType_t destAddr;
  destAddr.addrMode = (afAddrMode_t)Addr16Bit;
  destAddr.addr.shortAddr = APP_DEST_ADDR;
  afStatus_t status = AF_DataRequest(&destAddr, &App_epDesc, APP_PERIODIC_CLUSTERID, sizeof(tx_data), tx_data, NULL, AF_DISCV_ROUTE, AF_DEFAULT_RADIUS);
}

void App_HandleMessage(zclIncoming_t *msg) {
  switch (msg->clusterId) {
    case APP_PERIODIC_CLUSTERID:
      break;
    default:
      break;
  }
}

这个代码使用了CC2530芯片，并使用了DHT11库来测量温度和湿度，使用了Zigbee协议来与其他设备进行通信。它通过AF_DataRequest()函数来发送温度和湿度数据到目标地址，并在控制台上输出发送的数据内容和目标地址。

需要注意的是，这只是一个简单的演示代码，具体的实现还需要根据实际需求来进行定制化开发。例如，您需要为传感器节点编写代码来测量温度和湿度，并将数据传输到数据收集器。同时，您也需要为数据收集器编写代码来处理传感器节点的数据，并将其存储到数据库中。