linux内核的重建目录的全部api

时间: 2023-05-29 22:01:18 浏览: 70
1. make 2. make config 3. make oldconfig 4. make xconfig 5. make menuconfig 6. make clean 7. make bzImage 8. make modules 9. make modules_install 10. make clean-modules 11. make mrproper 12. make dep 13. make install 14. make prepare 15. make headers_install 16. make modules_prepare 17. make localmodconfig 18. make olddefconfig 19. make kvmconfig 20. make nconfig 21. make savedefconfig 22. make allyesconfig 23. make allnoconfig 24. make randconfig 25. make bcm2835_defconfig 26. make tinyconfig 27. make smallest 28. make allmodconfig 29. make defconfig 30. make savedefconfig 31. make gconfig 32. make oldconfig 33. make silentoldconfig 34. make olddefconfig 35. make localyesconfig 36. make localmodconfig 37. make alldefconfig 38. make ibmcell_defconfig 39. make kvm_guest.config 40. make ps3_defconfig 41. make menuconfig 42. make allyesconfig 43. make allnoconfig 44. make defconfig 45. make tinyconfig 46. make minconfig 47. make savedefconfig 48. make allmodconfig 49. make randconfig 50. make oldconfig 51. make silentoldconfig 52. make bzImage 53. make install 54. make modules_install 55. make headers_install

相关推荐

最新推荐

recommend-type

linux内核4.7版本设备驱动介绍

linux内核4.7版本设备驱动介绍,包含如下模块:class、pci、platform、pinctrl、kset、kobject、bus、device、device_driver、i2c、tty、regmap、misc、spin_lock、inode、mutex、cdev、gpio_keys、usb
recommend-type

Linux内核启动参数详解

Linux内核在启动的时候,能接收某些命令行选项或启动时参数。当内核不能识别某些硬件进而不能设置硬件参数或者为了避免内核更改某些参数的值,可以通过这种方式手动将这些参数传递给内核。
recommend-type

qemu调试arm linux 内核环境搭建.doc

arm, x86 两个平台的qemu 模拟器的安装,gdb 的安装,内核的编译的核调试 ,包括根文件系统的制作,实测的启动参数
recommend-type

linux内核模块的编译详解(有图)

linux内核模块的编译。 1、准备内核模块源码 2、编写Makefile文件 3、编译模块 4、加载/卸载模块 5、加载模块时传递参数 6、总结
recommend-type

Linux内核参数优化调整

关于cache怎么设置,linux系统内核设置优化tcp网络,另外可以参考优化内核配置
recommend-type

zigbee-cluster-library-specification

最新的zigbee-cluster-library-specification说明文档。
recommend-type

管理建模和仿真的文件

管理Boualem Benatallah引用此版本:布阿利姆·贝纳塔拉。管理建模和仿真。约瑟夫-傅立叶大学-格勒诺布尔第一大学,1996年。法语。NNT:电话:00345357HAL ID:电话:00345357https://theses.hal.science/tel-003453572008年12月9日提交HAL是一个多学科的开放存取档案馆,用于存放和传播科学研究论文,无论它们是否被公开。论文可以来自法国或国外的教学和研究机构,也可以来自公共或私人研究中心。L’archive ouverte pluridisciplinaire
recommend-type

【实战演练】增量式PID的simulink仿真实现

# 2.1 Simulink仿真环境简介 Simulink是MATLAB中用于建模、仿真和分析动态系统的图形化环境。它提供了一个直观的用户界面,允许用户使用块和连接线来创建系统模型。Simulink模型由以下元素组成: - **子系统:**将复杂系统分解成更小的、可管理的模块。 - **块:**代表系统中的组件,如传感器、执行器和控制器。 - **连接线:**表示信号在块之间的流动。 Simulink仿真环境提供了广泛的块库,涵盖了各种工程学科,包括控制系统、电子和机械工程。它还支持用户自定义块的创建,以满足特定仿真需求。 # 2. Simulink仿真环境的搭建和建模 ### 2.
recommend-type

训练集和测试集的准确率都99%,但是预测效果不好

即使训练集和测试集的准确率都很高,但是在实际的预测中表现不佳,可能会有以下几个原因: 1. 数据质量问题:模型训练和测试的数据可能存在问题,比如数据标签错误、数据集采样不均衡、数据集中存在异常值等问题,这些问题可能会导致模型在实际预测中表现不佳。 2. 特征工程问题:模型的特征工程可能存在问题,导致模型无法很好地捕捉数据的特征,从而影响预测效果。 3. 模型选择问题:模型的选择可能不合适,比如选择的模型太简单,无法很好地拟合数据,或者选择的模型太复杂,导致过拟合等问题。 4. 超参数调整问题:模型的超参数可能没有调整到最佳状态,需要进行调整。 针对以上可能的原因,可以采取相应的措施进
recommend-type

JSBSim Reference Manual

JSBSim参考手册,其中包含JSBSim简介,JSBSim配置文件xml的编写语法,编程手册以及一些应用实例等。其中有部分内容还没有写完,估计有生之年很难看到完整版了,但是内容还是很有参考价值的。