alloc_chrdev_region输入的参数有哪些?
时间: 2023-06-02 08:01:37 浏览: 59
alloc_chrdev_region函数的参数有三个:
1. dev:表示要分配的设备号,通常使用MKDEV(major, minor)来定义。
2. baseminor:表示设备号的最小值。
3. count:表示要分配的设备号数量。
相关问题
alloc_chrdev_region
`alloc_chrdev_region` 是 Linux 内核中的一个函数,用于动态分配字符设备的主设备号和次设备号。该函数的原型定义在 `<linux/fs.h>` 头文件中:
```c
int alloc_chrdev_region(dev_t *dev, unsigned int firstminor, unsigned int count, const char *name);
```
其中,参数含义如下:
- `dev`:输出参数,返回分配的设备号(主设备号和起始的次设备号);
- `firstminor`:指定次设备号的起始值;
- `count`:指定需要分配的连续的设备号的数量;
- `name`:指定分配的设备号对应的设备名称,用于在 `/proc/devices` 中显示。
使用 `alloc_chrdev_region` 函数可以动态地分配字符设备的设备号,避免了手动指定设备号可能带来的冲突问题。函数返回值为 0 表示成功,否则表示失败。
alloc_chrdev_region() 函数如何使用
alloc_chrdev_region() 函数是 Linux 内核中用于动态分配主设备号的函数,它的定义如下:
```c
int alloc_chrdev_region(dev_t *dev, unsigned int firstminor, unsigned int count, const char *name);
```
该函数的参数说明如下:
- dev:用于返回分配的第一个设备号(主设备号和次设备号组成的设备号)。
- firstminor:要分配的第一个从设备号。在分配设备号时,主设备号是由系统动态分配的,因此需要指定第一个从设备号。
- count:要分配的设备号的数量。
- name:设备的名称。
使用 alloc_chrdev_region() 函数分配主设备号的过程如下:
1. 定义 dev_t 和设备名称 name 变量。
```c
dev_t dev;
const char *name = "mydevice";
```
2. 调用 alloc_chrdev_region() 函数分配主设备号。
```c
int ret = alloc_chrdev_region(&dev, 0, 1, name);
```
其中,第二个参数 0 表示从第 0 个从设备号开始分配,第三个参数 1 表示要分配一个设备号。
3. 检查分配是否成功。
```c
if (ret)
{
printk(KERN_ERR "Failed to allocate device number\n");
return ret;
}
```
如果分配失败,函数将返回一个非零值,需要根据返回值进行错误处理。
4. 使用分配的设备号。
```c
unsigned int major = MAJOR(dev);
unsigned int minor = MINOR(dev);
```
使用 MAJOR() 和 MINOR() 宏分别获取主设备号和次设备号。
5. 注册设备驱动程序。
```c
ret = register_chrdev_region(dev, 1, name);
```
使用 register_chrdev_region() 函数注册设备驱动程序,其中第二个参数 1 表示只注册一个设备号,因为我们只分配了一个设备号。
以上是使用 alloc_chrdev_region() 函数动态分配主设备号的基本过程。需要注意的是,如果使用了动态分配的主设备号,需要在使用完成后将其释放。可以使用 unregister_chrdev_region() 函数释放主设备号。