STM32DHT11读取温湿度
时间: 2024-03-02 20:28:31 浏览: 18
读取DHT11温湿度传感器需要使用STM32的GPIO口读取传感器的数据引脚,并解析传感器数据。下面是一个简单的示例代码,可以帮助您快速开始:
```c
#include "stm32f10x.h"
#include "delay.h"
#define DHT11_PORT GPIOB
#define DHT11_PIN GPIO_Pin_12
void DHT11_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitStructure.GPIO_Pin = DHT11_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(DHT11_PORT, &GPIO_InitStructure);
GPIO_SetBits(DHT11_PORT, DHT11_PIN);
delay_ms(1000);
}
void DHT11_Start(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = DHT11_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(DHT11_PORT, &GPIO_InitStructure);
GPIO_ResetBits(DHT11_PORT, DHT11_PIN);
delay_ms(18);
GPIO_SetBits(DHT11_PORT, DHT11_PIN);
delay_us(30);
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(DHT11_PORT, &GPIO_InitStructure);
}
u8 DHT11_Check(void)
{
u8 retry = 0;
while (GPIO_ReadInputDataBit(DHT11_PORT, DHT11_PIN) && retry < 100) {
retry++;
delay_us(1);
}
if (retry >= 100) {
return 1;
}
retry = 0;
while (!GPIO_ReadInputDataBit(DHT11_PORT, DHT11_PIN) && retry < 100) {
retry++;
delay_us(1);
}
if (retry >= 100) {
return 1;
}
return 0;
}
u8 DHT11_Read_Bit(void)
{
u8 retry = 0;
while (GPIO_ReadInputDataBit(DHT11_PORT, DHT11_PIN) && retry < 100) {
retry++;
delay_us(1);
}
retry = 0;
while (!GPIO_ReadInputDataBit(DHT11_PORT, DHT11_PIN) && retry < 100) {
retry++;
delay_us(1);
}
delay_us(40);
if (GPIO_ReadInputDataBit(DHT11_PORT, DHT11_PIN)) {
return 1;
} else {
return 0;
}
}
u8 DHT11_Read_Byte(void)
{
u8 i, data = 0;
for (i = 0; i < 8; i++) {
data <<= 1;
data |= DHT11_Read_Bit();
}
return data;
}
u8 DHT11_Read_Data(u8 *temp, u8 *humi)
{
u8 buf[5], i;
DHT11_Start();
if (DHT11_Check()) {
return 1;
}
for (i = 0; i < 5; i++) {
buf[i] = DHT11_Read_Byte();
}
if ((buf[0] + buf[1] + buf[2] + buf[3]) == buf[4]) {
*humi = buf[0];
*temp = buf[2];
return 0;
} else {
return 1;
}
}
int main(void)
{
u8 temp, humi;
DHT11_Init();
while (1) {
if (DHT11_Read_Data(&temp, &humi) == 0) {
printf("Temperature: %d C\n", temp);
printf("Humidity: %d %%\n", humi);
} else {
printf("Read DHT11 failed!\n");
}
delay_ms(1000);
}
}
```
该代码使用了STM32的GPIO库和延时库,需要根据您的实际情况进行修改。在主函数中,我们不断读取DHT11传感器的温湿度数据,并通过串口输出到终端。需要注意的是,在读取DHT11数据之前,需要先初始化传感器,并且每次读取数据之前需要调用DHT11_Start()函数发送起始信号。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)