用arduino和esp8266写引脚上升沿和下降沿的中断函数
时间: 2023-05-22 18:03:17 浏览: 413
好的,以下是一个用arduino和esp8266编写的引脚上升沿和下降沿的中断函数的示例代码:
```
const int interruptPin = D3; // change this to whatever pin you're using
volatile bool rising_edge_detected = false;
volatile bool falling_edge_detected = false;
void ICACHE_RAM_ATTR handleInterrupt() {
// check if interrupt was a rising edge or falling edge
if(digitalRead(interruptPin) == HIGH) {
rising_edge_detected = true;
} else {
falling_edge_detected = true;
}
}
void setup() {
pinMode(interruptPin, INPUT_PULLUP);
attachInterrupt(digitalPinToInterrupt(interruptPin), handleInterrupt, CHANGE);
}
void loop() {
// check if a rising edge or falling edge interrupt occurred
if(rising_edge_detected) {
// do something on rising edge here...
rising_edge_detected = false;
}
if(falling_edge_detected) {
// do something on falling edge here...
falling_edge_detected = false;
}
}
```
该代码设置引脚D3(可以更改)作为输入,并使其在上升沿和下降沿时触发中断功能。在中断服务函数中,检查输入针脚的状态以检测是上升还是下降沿,并将对应的标志位设置为true。在主循环中,检查标志位并执行相应的操作。请注意,由于中断服务函数是异步执行的,因此涉及共享变量的代码需要考虑并发问题。