void PMSensor_DataReflash(void) // PM传感器数据回流函数 解析函数 { uint16_t Buffer_Len; //缓冲区长度 memset(&PM_Sensor_Data,0,(sizeof(PM_Sensor_Data) - 2)); //PM_Sensor_Data.PM2_5_Old should not set to zero Buffer_Len = (uint16_t)((PM_Sensor_RxBuffer[2] << 8) | PM_Sensor_RxBuffer[3]); if(Buffer_Len == 36) //PMS1003/5003 { PM_Sensor_Data.Buffer_Len = 36; PM_Sensor_Data.PM1_0_CF = (uint16_t)((PM_Sensor_RxBuffer[4]<<8) | PM_Sensor_RxBuffer[5]); PM_Sensor_Data.PM2_5_CF = (uint16_t)((PM_Sensor_RxBuffer[6]<<8) | PM_Sensor_RxBuffer[7]); PM_Sensor_Data.PM10_CF = (uint16_t)((PM_Sensor_RxBuffer[8]<<8) | PM_Sensor_RxBuffer[9]); PM_Sensor_Data.PM1_0 = (uint16_t)((PM_Sensor_RxBuffer[10]<<8) | PM_Sensor_RxBuffer[11]); PM_Sensor_Data.PM2_5 = (uint16_t)((PM_Sensor_RxBuffer[12]<<8) | PM_Sensor_RxBuffer[13]); PM_Sensor_Data.PM10 = (uint16_t)((PM_Sensor_RxBuffer[14]<<8) | PM_Sensor_RxBuffer[15]); PM_Sensor_Data.Count0_3nm = (uint16_t)((PM_Sensor_RxBuffer[16]<<8) | PM_Sensor_RxBuffer[17]); PM_Sensor_Data.Count0_5nm = (uint16_t)((PM_Sensor_RxBuffer[18]<<8) | PM_Sensor_RxBuffer[19]); PM_Sensor_Data.Count1_0nm = (uint16_t)((PM_Sensor_RxBuffer[20]<<8) | PM_Sensor_RxBuffer[21]); PM_Sensor_Data.Count2_5nm = (uint16_t)((PM_Sensor_RxBuffer[22]<<8) | PM_Sensor_RxBuffer[23]); PM_Sensor_Data.Count5_0nm = (uint16_t)((PM_Sensor_RxBuffer[24]<<8) | PM_Sensor_RxBuffer[25]); PM_Sensor_Data.Count10nm = (uint16_t)((PM_Sensor_RxBuffer[26]<<8) | PM_Sensor_RxBuffer[27]); } } 写一个主函数读取这个结构体的数据

假设你已经定义了一个结构体类型`PMData`来存储PM传感器的数据，结构体定义如下：

typedef struct {
    uint16_t Buffer_Len;
    uint16_t PM1_0_CF;
    uint16_t PM2_5_CF;
    uint16_t PM10_CF;
    uint16_t PM1_0;
    uint16_t PM2_5;
    uint16_t PM10;
    uint16_t Count0_3nm;
    uint16_t Count0_5nm;
    uint16_t Count1_0nm;
    uint16_t Count2_5nm;
    uint16_t Count5_0nm;
    uint16_t Count10nm;
} PMData;

你可以在主函数中定义一个`PMData`类型的变量，并调用`PMSensor_DataReflash`函数更新数据，然后读取结构体中的数据，示例代码如下：

int main() {
    PMData pm_data;  // 定义一个PMData类型的变量
    PMSensor_DataReflash(); // 更新数据
    // 读取数据
    printf("PM1.0_CF: %d\n", pm_data.PM1_0_CF);
    printf("PM2.5_CF: %d\n", pm_data.PM2_5_CF);
    printf("PM10_CF: %d\n", pm_data.PM10_CF);
    printf("PM1.0: %d\n", pm_data.PM1_0);
    printf("PM2.5: %d\n", pm_data.PM2_5);
    printf("PM10: %d\n", pm_data.PM10);
    printf("Count0.3nm: %d\n", pm_data.Count0_3nm);
    printf("Count0.5nm: %d\n", pm_data.Count0_5nm);
    printf("Count1.0nm: %d\n", pm_data.Count1_0nm);
    printf("Count2.5nm: %d\n", pm_data.Count2_5nm);
    printf("Count5.0nm: %d\n", pm_data.Count5_0nm);
    printf("Count10nm: %d\n", pm_data.Count10nm);
    return 0;
}

请注意，在调用`PMSensor_DataReflash`函数之前，你需要初始化`PM_Sensor_RxBuffer`数组的值，否则可能会出现意想不到的错误。此处省略了初始化的代码。