使用DA14531开发过程中,如何读取DHT11的实时数据
时间: 2024-05-06 21:19:47 浏览: 19
要使用DA14531读取DHT11的实时数据,您需要连接DHT11模块到DA14531的GPIO引脚。然后,您可以使用GPIO驱动程序来读取GPIO引脚的状态,并将其转换为温度和湿度值。
以下是一个基本的示例代码来读取DHT11的实时数据:
```c
#include "gpio.h"
#include "uart.h"
#include "dht11.h"
#define DHT11_PIN (GPIO_PORT_0_PIN_0)
int main(void)
{
uint8_t data[5] = {0};
// 初始化GPIO引脚
gpio_configure_pin(DHT11_PIN, GPIO_INPUT, GPIO_PULL_UP);
while (1) {
// 读取DHT11数据
if (dht11_read_data(DHT11_PIN, data) == DHT11_OK) {
// 打印温度和湿度值
printf("Temperature: %d.%d C\n", data[2], data[3]);
printf("Humidity: %d.%d %%\n", data[0], data[1]);
} else {
printf("Failed to read DHT11 data\n");
}
// 等待一段时间再读取数据
sleep(1);
}
}
```
在上述示例代码中,我们使用了DA14531的GPIO驱动程序来配置DHT11引脚为输入模式,并使其具有上拉电阻。然后,我们使用DHT11库中的函数来读取DHT11数据,并将其转换为温度和湿度值。最后,我们使用UART驱动程序来打印这些值。
请注意,DHT11的数据传输是比较慢的,因此我们需要等待一段时间再读取下一次数据。在上述示例代码中,我们使用了sleep函数来暂停程序执行一秒钟,以便等待DHT11模块传输完所有数据。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)