sx1276 stm32 spi通讯方式初始化
时间: 2023-08-08 19:12:47 浏览: 112
下面是SX1276与STM32使用SPI通信的初始化代码示例:
```
#include <SPI.h>
#include <LoRa.h>
#define NSS_PIN PA4
#define NRESET_PIN PB0
#define DIO0_PIN PB1
void setup() {
Serial.begin(9600);
while (!Serial);
// Initialize NSS, NRESET, and DIO0 pins
pinMode(NSS_PIN, OUTPUT);
pinMode(NRESET_PIN, OUTPUT);
pinMode(DIO0_PIN, INPUT);
// Reset the SX1276 module
digitalWrite(NRESET_PIN, LOW);
delay(10);
digitalWrite(NRESET_PIN, HIGH);
delay(10);
// Initialize SPI communication
SPI.begin();
SPI.beginTransaction(SPISettings(10000000, MSBFIRST, SPI_MODE0)); // Set the SPI clock frequency to 10MHz
// Initialize LoRa module
LoRa.setPins(NSS_PIN, NRESET_PIN, DIO0_PIN);
if (!LoRa.begin(433E6)) {
Serial.println("Starting LoRa failed!");
while (1);
}
}
void loop() {
Serial.print("Sending packet: ");
Serial.println(counter);
// send packet
LoRa.beginPacket();
LoRa.print("hello ");
LoRa.print(counter);
LoRa.endPacket();
counter++;
delay(5000);
}
```
需要注意的是,在STM32中需要在程序中指定NSS、NRESET和DIO0引脚的映射。在这里,我们使用PA4作为NSS引脚,PB0作为NRESET引脚,PB1作为DIO0引脚。在初始化时,我们需要将这些引脚设置为输入或输出,并设置NRESET引脚为低电平,然后再将其设置为高电平以重置SX1276模块。在SPI通信方面,我们需要在程序中指定SPI时钟频率和数据传输模式。在这里,我们将时钟频率设置为10MHz,数据传输模式设置为SPI_MODE0。最后,我们初始化LoRa模块,设置NSS、NRESET和DIO0引脚,并在433MHz频率下开始通信。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)