uvm中设置发送一百个数据,driver中只发一个数据是什么原因
时间: 2024-04-04 19:30:07 浏览: 12
在UVM中,设置发送一百个数据但在driver中只发送一个数据的原因可能是以下几种情况之一:
1. 驱动(driver)的行为设计如此:驱动可能被设计为每次只发送一个数据,无论测试中需要发送多少个数据。这可能是出于设计的考虑,例如为了方便调试或简化驱动逻辑。
2. 驱动的实现存在问题:可能有一个错误导致驱动在每个事务中只发送一个数据,而不是根据需要发送多个数据。这可能是由于代码逻辑错误、未正确设置驱动的发送计数器或其他问题导致的。
3. 测试用例的配置错误:在设置发送一百个数据的UVM测试用例时,可能有一个配置错误导致驱动只发送一个数据。这可能是由于配置上的错误、环境中的限制或其他原因导致的。
需要进一步检查驱动代码、测试用例配置和环境设置等方面,以确定为什么只有一个数据被发送。
相关问题
用UVM写一个 CHI协议中LINK layer的driver
下面是一个 CHI 协议中 LINK layer 的 driver 的 UVM 代码示例:
```systemverilog
class chi_link_driver extends uvm_driver #(chi_packet);
`uvm_component_utils(chi_link_driver)
virtual function void build_phase(uvm_phase phase);
super.build_phase(phase);
// Get the virtual interface handle to the DUT
if (!uvm_config_db #(virtual chi_if)::get(this, "", "chi_if", m_if))
`uvm_fatal("NO_IF", "Virtual interface not defined for chi_link_driver")
// Create and configure the sequence item queue
m_seq_item_q = new("seq_item_q", this);
m_seq_item_q.default_priority = 100;
endfunction
virtual task run_phase(uvm_phase phase);
chi_packet pkt;
while (1) begin
// Wait for the next sequence item to be available
@(m_seq_item_q.get_with_priority(pkt))
// Send the CHI packet to the DUT using the virtual interface
m_if.write(pkt);
end
endtask
endclass
```
在上面的代码中,`chi_packet` 是一个定义了 CHI packet 的 UVM sequence item 类。`build_phase` 函数获取了指向 DUT 的虚拟接口 `m_if`,并创建了一个名为 `m_seq_item_q` 的 sequence item 队列。`run_phase` 函数使用 `m_seq_item_q` 从队列中获取下一个 sequence item 并将其发送到 DUT。这个 driver 只负责发送 CHI packet 到 DUT,接收 CHI packet 的逻辑需要在 monitor 中实现。
用UVM写一个 CHI协议中LINK layer的tx driver
下面是一个 CHI 协议中 LINK layer 的 tx driver 的 UVM 代码示例:
```systemverilog
class chi_link_tx_driver extends uvm_driver #(chi_packet);
`uvm_component_utils(chi_link_tx_driver)
virtual function void build_phase(uvm_phase phase);
super.build_phase(phase);
// Get the virtual interface handle to the DUT
if (!uvm_config_db #(virtual chi_if)::get(this, "", "chi_if", m_if))
`uvm_fatal("NO_IF", "Virtual interface not defined for chi_link_tx_driver")
// Create and configure the sequence item queue
m_seq_item_q = new("seq_item_q", this);
m_seq_item_q.default_priority = 100;
endfunction
virtual task run_phase(uvm_phase phase);
chi_packet pkt;
while (1) begin
// Wait for the next sequence item to be available
@(m_seq_item_q.get_with_priority(pkt))
// Set the tx packet type and data
m_if.tx_pkt_type = pkt.type;
m_if.tx_pkt_data = pkt.data;
// Send the CHI packet to the DUT using the virtual interface
m_if.tx_pkt_valid = 1;
repeat (10) @(posedge m_if.clk);
m_if.tx_pkt_valid = 0;
end
endtask
endclass
```
在上面的代码中,`chi_packet` 是一个定义了 CHI packet 的 UVM sequence item 类。`build_phase` 函数获取了指向 DUT 的虚拟接口 `m_if`,并创建了一个名为 `m_seq_item_q` 的 sequence item 队列。`run_phase` 函数使用 `m_seq_item_q` 从队列中获取下一个 sequence item 并将其发送到 DUT。
在发送 CHI packet 之前,该 driver 需要将 packet 的类型和数据传递给 DUT,这里使用了虚拟接口中的两个信号 `tx_pkt_type` 和 `tx_pkt_data`。然后,该 driver 设置 `tx_pkt_valid` 信号为 1,表示 CHI packet 准备就绪。为了确保 DUT 能够接收到整个 packet,这里使用了一个简单的 `repeat` 循环来等待一定的时钟周期,然后将 `tx_pkt_valid` 信号置为 0,表示传输完成。