用Verilog编写蓝牙通信代码
时间: 2024-04-30 16:20:23 浏览: 6
在Verilog中编写蓝牙通信代码是一个复杂的过程,因为蓝牙协议本身就是一个复杂的协议。以下是一个基本的蓝牙通信代码的示例,用于发送数据:
```
module bluetooth_tx (
input clk,
input reset,
input [7:0] data_in,
output reg tx_busy,
output reg tx_done,
output reg [7:0] status
);
reg [7:0] tx_data;
reg [1:0] tx_state;
reg [3:0] bit_count;
reg tx_start;
parameter IDLE = 2'b00;
parameter START_BIT = 2'b01;
parameter DATA_BITS = 2'b10;
parameter STOP_BIT = 2'b11;
parameter TX_BUSY = 8'h80;
parameter TX_DONE = 8'h40;
always @(posedge clk) begin
if (reset) begin
tx_data <= 8'b0;
tx_state <= IDLE;
bit_count <= 4'b0;
tx_busy <= 1'b0;
tx_done <= 1'b0;
status <= 8'b0;
end else begin
case (tx_state)
IDLE: begin
tx_busy <= 1'b0;
tx_done <= 1'b0;
if (tx_start) begin
tx_data <= {1'b0, data_in, 1'b1};
tx_state <= START_BIT;
bit_count <= 4'b0;
tx_busy <= 1'b1;
end
end
START_BIT: begin
if (bit_count < 4) begin
tx_data <= {1'b0, data_in, 1'b1};
bit_count <= bit_count + 1;
end else begin
tx_data <= {1'b0, data_in, 1'b1};
tx_state <= DATA_BITS;
bit_count <= 4'b0;
end
end
DATA_BITS: begin
if (bit_count < 8) begin
tx_data <= {tx_data[6:0], data_in[bit_count], tx_data[0]};
bit_count <= bit_count + 1;
end else begin
tx_data <= {tx_data[6:0], data_in[bit_count], tx_data[0]};
tx_state <= STOP_BIT;
bit_count <= 4'b0;
end
end
STOP_BIT: begin
if (bit_count < 4) begin
tx_data <= {1'b1, tx_data[6:0], 1'b0};
bit_count <= bit_count + 1;
end else begin
tx_data <= {1'b1, tx_data[6:0], 1'b0};
tx_state <= IDLE;
tx_done <= 1'b1;
bit_count <= 4'b0;
end
end
endcase
end
end
assign status = (tx_busy ? TX_BUSY : 8'h0) | (tx_done ? TX_DONE : 8'h0);
endmodule
```
这个模块接受一个时钟信号和一个复位信号,以及一个8位数据输入信号。当 tx_start 信号设置为高电平时,模块会开始发送数据。在发送过程中,模块会生成起始位、数据位和停止位,并将它们作为串行数据发送。模块还生成 tx_busy 和 tx_done 信号,指示当前是否正在发送数据,以及数据是否已完成发送。
请注意,这只是一个基本的示例,实际的蓝牙通信代码可能会更加复杂,具体实现取决于您的需求和所用的蓝牙模块。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)