S5800双击热备配置具体命令

1. 配置主备交换机之间的互联口：

interface Ten-GigabitEthernet 1/0/1
port link-type trunk
port trunk allow-pass vlan all
port trunk pvid vlan 1
undo port trunk shutdown

2. 配置主备交换机之间的VRRP协议：

interface Vlanif 1
ip address 192.168.1.1 255.255.255.0
vrrp vrid 1 virtual-ip 192.168.1.10
vrrp vrid 1 priority 150
vrrp vrid 1 preempt-mode

3. 配置主交换机的双向同步：

hrp track object 1 weight value 100
hrp track object 2 weight value 100
hrp sync standby enable
hrp sync standby track object 1 state up
hrp sync standby track object 2 state up

4. 配置备交换机的热备功能：

hrp mode slave
hrp slave group 1
hrp slave track object 1 state up
hrp slave track object 2 state up
hrp slave preempt-mode enable

5. 配置主备交换机之间的同步端口：

hrp sync pair 1 source Ten-GigabitEthernet 1/0/1
hrp sync pair 1 destination 10.0.0.2

6. 配置主备交换机之间的心跳监测：

hrp track 1 ip address 192.168.1.2
hrp track 2 ip address 192.168.1.3

7. 配置主交换机的优先级为150：

hrp priority 150

8. 配置备交换机的优先级为100：

hrp slave priority 100